Connect to an External HTTPS Proxy

The Configure an Egress Gateway example shows how to direct traffic to external services from your mesh via an Istio edge component called Egress Gateway. However, some cases require an external, legacy (non-Istio) HTTPS proxy to access external services. For example, your company may already have such a proxy in place and all the applications within the organization may be required to direct their traffic through it.

This example shows how to enable access to an external HTTPS proxy. Since applications use the HTTP CONNECT method to establish connections with HTTPS proxies, configuring traffic to an external HTTPS proxy is different from configuring traffic to external HTTP and HTTPS services.

Before you begin

  • Setup Istio by following the instructions in the Installation guide.

  • Deploy the sleep sample app to use as a test source for sending requests. If you have automatic sidecar injection enabled, run the following command to deploy the sample app:

    Zip
    $ kubectl apply -f @samples/sleep/sleep.yaml@
    

    Otherwise, manually inject the sidecar before deploying the sleep application with the following command:

    Zip
    $ kubectl apply -f <(istioctl kube-inject -f @samples/sleep/sleep.yaml@)
    
  • Set the SOURCE_POD environment variable to the name of your source pod:

    $ export SOURCE_POD=$(kubectl get pod -l app=sleep -o jsonpath={.items..metadata.name})
    

Deploy an HTTPS proxy

To simulate a legacy proxy and only for this example, you deploy an HTTPS proxy inside your cluster. Also, to simulate a more realistic proxy that is running outside of your cluster, you will address the proxy’s pod by its IP address and not by the domain name of a Kubernetes service. This example uses Squid but you can use any HTTPS proxy that supports HTTP CONNECT.

  1. Create a namespace for the HTTPS proxy, without labeling it for sidecar injection. Without the label, sidecar injection is disabled in the new namespace so Istio will not control the traffic there. You need this behavior to simulate the proxy being outside of the cluster.

    $ kubectl create namespace external
    
  2. Create a configuration file for the Squid proxy.

    $ cat <<EOF > ./proxy.conf
    http_port 3128
    
    acl SSL_ports port 443
    acl CONNECT method CONNECT
    
    http_access deny CONNECT !SSL_ports
    http_access allow localhost manager
    http_access deny manager
    http_access allow all
    
    coredump_dir /var/spool/squid
    EOF
    
  3. Create a Kubernetes ConfigMap to hold the configuration of the proxy:

    $ kubectl create configmap proxy-configmap -n external --from-file=squid.conf=./proxy.conf
    
  4. Deploy a container with Squid:

    $ kubectl apply -f - <<EOF
    apiVersion: extensions/v1beta1
    kind: Deployment
    metadata:
      name: squid
      namespace: external
    spec:
      replicas: 1
      template:
        metadata:
          labels:
            app: squid
        spec:
          volumes:
          - name: proxy-config
            configMap:
              name: proxy-configmap
          containers:
          - name: squid
            image: sameersbn/squid:3.5.27
            imagePullPolicy: IfNotPresent
            volumeMounts:
            - name: proxy-config
              mountPath: /etc/squid
              readOnly: true
    EOF
    
  5. Deploy the sleep sample in the external namespace to test traffic to the proxy without Istio traffic control.

    Zip
    $ kubectl apply -n external -f @samples/sleep/sleep.yaml@
    
  6. Obtain the IP address of the proxy pod and define the PROXY_IP environment variable to store it:

    $ export PROXY_IP=$(kubectl get pod -n external -l app=squid -o jsonpath={.items..podIP})
    
  7. Define the PROXY_PORT environment variable to store the port of your proxy. In this case, Squid uses port 3128.

    $ export PROXY_PORT=3128
    
  8. Send a request from the sleep pod in the external namespace to an external service via the proxy:

    $ kubectl exec -it $(kubectl get pod -n external -l app=sleep -o jsonpath={.items..metadata.name}) -n external -- sh -c "HTTPS_PROXY=$PROXY_IP:$PROXY_PORT curl https://en.wikipedia.org/wiki/Main_Page" | grep -o "<title>.*</title>"
    <title>Wikipedia, the free encyclopedia</title>
    
  9. Check the access log of the proxy for your request:

    $ kubectl exec -it $(kubectl get pod -n external -l app=squid -o jsonpath={.items..metadata.name}) -n external -- tail -f /var/log/squid/access.log
    1544160065.248    228 172.30.109.89 TCP_TUNNEL/200 87633 CONNECT en.wikipedia.org:443 - HIER_DIRECT/91.198.174.192 -
    

So far, you completed the following tasks without Istio:

  • You deployed the HTTPS proxy.
  • You used curl to access the wikipedia.org external service through the proxy.

Next, you must configure the traffic from the Istio-enabled pods to use the HTTPS proxy.

Configure traffic to external HTTPS proxy

  1. Define a TCP (not HTTP!) Service Entry for the HTTPS proxy. Although applications use the HTTP CONNECT method to establish connections with HTTPS proxies, you must configure the proxy for TCP traffic, instead of HTTP. Once the connection is established, the proxy simply acts as a TCP tunnel.

    $ kubectl apply -f - <<EOF
    apiVersion: networking.istio.io/v1alpha3
    kind: ServiceEntry
    metadata:
      name: proxy
    spec:
      hosts:
      - my-company-proxy.com # ignored
      addresses:
      - $PROXY_IP/32
      ports:
      - number: $PROXY_PORT
        name: tcp
        protocol: TCP
      location: MESH_EXTERNAL
    EOF
    
  2. Send a request from the sleep pod in the default namespace. Because the sleep pod has a sidecar, Istio controls its traffic.

    $ kubectl exec -it $SOURCE_POD -c sleep -- sh -c "HTTPS_PROXY=$PROXY_IP:$PROXY_PORT curl https://en.wikipedia.org/wiki/Main_Page" | grep -o "<title>.*</title>"
    <title>Wikipedia, the free encyclopedia</title>
    
  3. Check the Istio sidecar proxy’s logs for your request:

    $ kubectl logs $SOURCE_POD -c istio-proxy
    [2018-12-07T10:38:02.841Z] "- - -" 0 - 702 87599 92 - "-" "-" "-" "-" "172.30.109.95:3128" outbound|3128||my-company-proxy.com 172.30.230.52:44478 172.30.109.95:3128 172.30.230.52:44476 -
    
  4. Check the access log of the proxy for your request:

    $ kubectl exec -it $(kubectl get pod -n external -l app=squid -o jsonpath={.items..metadata.name}) -n external -- tail -f /var/log/squid/access.log
    1544160065.248    228 172.30.109.89 TCP_TUNNEL/200 87633 CONNECT en.wikipedia.org:443 - HIER_DIRECT/91.198.174.192 -
    

Understanding what happened

In this example, you took the following steps:

  1. Deployed an HTTPS proxy to simulate an external proxy.
  2. Created a TCP service entry to enable Istio-controlled traffic to the external proxy.

Note that you must not create service entries for the external services you access through the external proxy, like wikipedia.org. This is because from Istio’s point of view the requests are sent to the external proxy only; Istio is not aware of the fact that the external proxy forwards the requests further.

Cleanup

  1. Shutdown the sleep service:

    Zip
    $ kubectl delete -f @samples/sleep/sleep.yaml@
    
  2. Shutdown the sleep service in the external namespace:

    Zip
    $ kubectl delete -f @samples/sleep/sleep.yaml@ -n external
    
  3. Shutdown the Squid proxy, remove the ConfigMap and the configuration file:

    $ kubectl delete -n external deployment squid
    $ kubectl delete -n external configmap proxy-configmap
    $ rm ./proxy.conf
    
  4. Delete the external namespace:

    $ kubectl delete namespace external
    
  5. Delete the Service Entry:

    $ kubectl delete serviceentry proxy