Authorization for groups and list claims

This tutorial walks you through examples to configure the groups-base authorization and the authorization of list-typed claims in Istio.

Before you begin

Setup the required namespace and services

This tutorial runs in a new namespace called rbac-groups-test-ns, with two services, httpbin and sleep, both running with an Envoy sidecar proxy. The following command sets an environmental variable to store the name of the namespace, creates the namespace, and starts the two services. Before running the following command, you need to enter the directory containing the Istio installation files.

  1. Set the value of the NS environmental variable to rbac-groups-test-ns:

    $ export NS=rbac-groups-test-ns
    
  2. Make sure that the NS environmental variable points to a testing-only namespace. Run the following command to delete all resources in the namespace pointed by the NS environmental variable.

    $ kubectl delete namespace $NS
    
  3. Create the namespace for this tutorial:

    $ kubectl create ns $NS
    
  4. Create the httpbin and sleep services and deployments:

    ZipZip
    $ kubectl apply -f <(istioctl kube-inject -f @samples/httpbin/httpbin.yaml@) -n $NS
    $ kubectl apply -f <(istioctl kube-inject -f @samples/sleep/sleep.yaml@) -n $NS
    
  5. To verify that httpbin and sleep services are running and sleep is able to reach httpbin, run the following curl command:

    $ kubectl exec $(kubectl get pod -l app=sleep -n $NS -o jsonpath={.items..metadata.name}) -c sleep -n $NS -- curl http://httpbin.$NS:8000/ip -s -o /dev/null -w "%{http_code}\n"
    

    When the command succeeds, it returns the HTTP code 200.

Configure JSON Web Token (JWT) authentication with mutual TLS

The authentication policy you apply next enforces that a valid JWT is needed to access the httpbin service. The JSON Web Key Set (JWKS) endpoint defined in the policy must sign the JWT. This tutorial uses the JWKS endpoint from the Istio code base and uses this sample JWT. The sample JWT contains a JWT claim with a groups claim key and a list of strings, ["group1", "group2"] as the claim value. The JWT claim value could either be a string or a list of strings; both types are supported.

  1. Apply an authentication policy to require both mutual TLS and JWT authentication for httpbin.

    $ cat <<EOF | kubectl apply -n $NS -f -
    apiVersion: "authentication.istio.io/v1alpha1"
    kind: "Policy"
    metadata:
      name: "require-mtls-jwt"
    spec:
      targets:
      - name: httpbin
      peers:
      - mtls: {}
      origins:
      - jwt:
          issuer: "testing@secure.istio.io"
          jwksUri: "https://raw.githubusercontent.com/istio/istio/release-1.3/security/tools/jwt/samples/jwks.json"
      principalBinding: USE_ORIGIN
    EOF
    
  2. Apply a DestinationRule policy on sleep to use mutual TLS when communicating with httpbin.

    $ cat <<EOF | kubectl apply -n $NS -f -
    apiVersion: networking.istio.io/v1alpha3
    kind: DestinationRule
    metadata:
      name: use-mtls-on-sleep
    spec:
      host: httpbin.$NS.svc.cluster.local
      trafficPolicy:
        tls:
          mode: ISTIO_MUTUAL
    EOF
    
  3. Set the TOKEN environmental variable to contain a valid sample JWT.

    $ TOKEN=$(curl https://raw.githubusercontent.com/istio/istio/release-1.3/security/tools/jwt/samples/groups-scope.jwt -s)
    
  4. Connect to the httpbin service:

    $ kubectl exec $(kubectl get pod -l app=sleep -n $NS -o jsonpath={.items..metadata.name}) -c sleep -n $NS -- curl http://httpbin.$NS:8000/ip -s -o /dev/null -w "%{http_code}\n" --header "Authorization: Bearer $TOKEN"
    

    When a valid JWT is attached, it returns the HTTP code 200.

  5. Verify that the connection to the httpbin service fails when the JWT is not attached:

    $ kubectl exec $(kubectl get pod -l app=sleep -n $NS -o jsonpath={.items..metadata.name}) -c sleep -n $NS -- curl http://httpbin.$NS:8000/ip -s -o /dev/null -w "%{http_code}\n"
    

    When no valid JWT is attached, it returns the HTTP code 401.

Configure groups-based authorization

This section creates a policy to authorize the access to the httpbin service if the requests are originated from specific groups. As there may be some delays due to caching and other propagation overhead, wait until the newly defined RBAC policy to take effect.

  1. Enable the Istio RBAC for the namespace:

    $ cat <<EOF | kubectl apply -n $NS -f -
    apiVersion: "rbac.istio.io/v1alpha1"
    kind: ClusterRbacConfig
    metadata:
      name: default
    spec:
      mode: 'ON_WITH_INCLUSION'
      inclusion:
        namespaces: ["rbac-groups-test-ns"]
    EOF
    
  2. Once the RBAC policy takes effect, verify that Istio rejected the curl connection to the httpbin service:

    $ kubectl exec $(kubectl get pod -l app=sleep -n $NS -o jsonpath={.items..metadata.name}) -c sleep -n $NS -- curl http://httpbin.$NS:8000/ip -s -o /dev/null -w "%{http_code}\n" --header "Authorization: Bearer $TOKEN"
    

    Once the RBAC policy takes effect, the command returns the HTTP code 403.

  3. To give read access to the httpbin service, create the httpbin-viewer service role:

    $ cat <<EOF | kubectl apply -n $NS -f -
    apiVersion: "rbac.istio.io/v1alpha1"
    kind: ServiceRole
    metadata:
      name: httpbin-viewer
      namespace: rbac-groups-test-ns
    spec:
      rules:
      - services: ["httpbin.rbac-groups-test-ns.svc.cluster.local"]
        methods: ["GET"]
    EOF
    
  4. To assign the httpbin-viewer role to users in group1, create the bind-httpbin-viewer service role binding.

    $ cat <<EOF | kubectl apply -n $NS -f -
    apiVersion: "rbac.istio.io/v1alpha1"
    kind: ServiceRoleBinding
    metadata:
      name: bind-httpbin-viewer
      namespace: rbac-groups-test-ns
    spec:
      subjects:
      - properties:
          request.auth.claims[groups]: "group1"
      roleRef:
        kind: ServiceRole
        name: "httpbin-viewer"
    EOF
    

    Alternatively, you can specify the group property under subjects. Both ways to specify the group are equivalent. Currently, Istio only supports matching against a list of strings in the JWT for the request.auth.claims property and the group property under subjects.

    To specify the group property under subjects, use the following command:

    $ cat <<EOF | kubectl apply -n $NS -f -
    apiVersion: "rbac.istio.io/v1alpha1"
    kind: ServiceRoleBinding
    metadata:
      name: bind-httpbin-viewer
      namespace: rbac-groups-test-ns
    spec:
      subjects:
      - group: "group1"
      roleRef:
        kind: ServiceRole
        name: "httpbin-viewer"
    EOF
    

    Wait for the newly defined RBAC policy to take effect.

  5. After the RBAC policy takes effect, verify the connection to the httpbin service succeeds:

    $ kubectl exec $(kubectl get pod -l app=sleep -n $NS -o jsonpath={.items..metadata.name}) -c sleep -n $NS -- curl http://httpbin.$NS:8000/ip -s -o /dev/null -w "%{http_code}\n" --header "Authorization: Bearer $TOKEN"
    

    The HTTP header including a valid JWT with the groups claim value of ["group1", "group2"] returns HTTP code 200 since it contains group1.

Configure the authorization of list-typed claims

Istio RBAC supports configuring the authorization of list-typed claims. The example JWT contains a JWT claim with a scope claim key and a list of strings, ["scope1", "scope2"] as the claim value. You may use the gen-jwt python script to generate a JWT with other list-typed claims for testing purposes. Follow the instructions in the gen-jwt script to use the gen-jwt.py file.

  1. To assign the httpbin-viewer role to a request with a JWT including a list-typed scope claim with the value of scope1, create a service role binding with name bind-httpbin-viewer:

    $ cat <<EOF | kubectl apply -n $NS -f -
    apiVersion: "rbac.istio.io/v1alpha1"
    kind: ServiceRoleBinding
    metadata:
      name: bind-httpbin-viewer
      namespace: rbac-groups-test-ns
    spec:
      subjects:
      - properties:
          request.auth.claims[scope]: "scope1"
      roleRef:
        kind: ServiceRole
        name: "httpbin-viewer"
    EOF
    

    Wait for the newly defined RBAC policy to take effect.

  2. After the RBAC policy takes effect, verify that the connection to the httpbin service succeeds:

    $ kubectl exec $(kubectl get pod -l app=sleep -n $NS -o jsonpath={.items..metadata.name}) -c sleep -n $NS -- curl http://httpbin.$NS:8000/ip -s -o /dev/null -w "%{http_code}\n" --header "Authorization: Bearer $TOKEN"
    

    The HTTP header including a valid JWT with the scope claim value of ["scope1", "scope2"] returns HTTP code 200 since it contains scope1.

Cleanup

After completing this tutorial, run the following command to delete all resources created in the namespace.

$ kubectl delete namespace $NS