istioctl

Istio configuration command line utility for service operators to debug and diagnose their Istio mesh.

FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl analyze

Analyze Istio configuration and print validation messages

istioctl analyze <file>... [flags]
FlagsShorthandDescription
--all-namespaces-AAnalyze all namespaces
--colorDefault true. Disable with '=false' or set $TERM to dumb
--context <string>The name of the kubeconfig context to use (default ``)
--failure-threshold <Level>The severity level of analysis at which to set a non-zero exit code. Valid values: [Info Warn Error] (default `Warn`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--list-analyzers-LList the analyzers available to run. Suppresses normal execution.
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--meshConfigFile <string>Overrides the mesh config values to use for analysis. (default ``)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOutput format: one of [log json yaml] (default `log`)
--output-threshold <Level>The severity level of analysis at which to display messages. Valid values: [Info Warn Error] (default `Info`)
--recursive-RProcess directory arguments recursively. Useful when you want to analyze related manifests organized within the same directory.
--suppress <stringArray>-SSuppress reporting a message code on a specific resource. Values are supplied in the form <code>=<resource> (e.g. '--suppress "IST0102=DestinationRule primary-dr.default"'). Can be repeated. You can include the wildcard character '*' to support a partial match (e.g. '--suppress "IST0102=DestinationRule *.default" ). (default `[]`)
--timeout <duration>the duration to wait before failing (default `30s`)
--use-kube-kUse live Kubernetes cluster for analysis. Set --use-kube=false to analyze files only.
--verbose-vEnable verbose output

Examples


# Analyze the current live cluster
istioctl analyze

# Analyze the current live cluster, simulating the effect of applying additional yaml files
istioctl analyze a.yaml b.yaml my-app-config/

# Analyze the current live cluster, simulating the effect of applying a directory of config recursively
istioctl analyze --recursive my-istio-config/

# Analyze yaml files without connecting to a live cluster
istioctl analyze --use-kube=false a.yaml b.yaml my-app-config/

# Analyze the current live cluster and suppress PodMissingProxy for pod mypod in namespace 'testing'.
istioctl analyze -S "IST0103=Pod mypod.testing"

# Analyze the current live cluster and suppress PodMissingProxy for all pods in namespace 'testing',
# and suppress MisplacedAnnotation on deployment foobar in namespace default.
istioctl analyze -S "IST0103=Pod *.testing" -S "IST0107=Deployment foobar.default"

# List available analyzers
istioctl analyze -L

istioctl authn

A group of commands used to interact with Istio authentication policies. tls-check

FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

# Check whether TLS setting are matching between authentication policy and destination rules:
istioctl authn tls-check

istioctl authn tls-check

Check what authentication policies and destination rules pilot uses to config a proxy instance, and check if TLS settings are compatible between them.

istioctl authn tls-check <pod-name[.namespace]> [<service>] [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples


# Check settings for pod "foo-656bd7df7c-5zp4s" in namespace default:
istioctl authn tls-check foo-656bd7df7c-5zp4s.default

# Check settings for pod "foo-656bd7df7c-5zp4s" in namespace default, filtered on destination
service "bar" :
istioctl authn tls-check foo-656bd7df7c-5zp4s.default bar

istioctl authz

(authz is experimental. Use `istioctl experimental authz`)

istioctl authz [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl convert-ingress

Converts Ingresses into VirtualService configuration on a best effort basis. The output should be considered a starting point for your Istio configuration and probably require some minor modification. Warnings will be generated where configs cannot be converted perfectly. The input must be a Kubernetes Ingress. The conversion of v1alpha1 Istio rules has been removed from istioctl.

istioctl convert-ingress [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--filenames <stringSlice>-fInput filenames (default `[]`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOutput filename (default `-`)

Examples

istioctl convert-ingress -f samples/bookinfo/platform/kube/bookinfo-ingress.yaml

istioctl dashboard

Access to Istio web UIs

istioctl dashboard [flags]
istioctl dash [flags]
istioctl d [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl dashboard controlz

Open the ControlZ web UI for a pod in the Istio control plane

istioctl dashboard controlz <pod-name[.namespace]> [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--ctrlz_port <int>ControlZ port (default `9876`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--selector <string>-llabel selector (default ``)

Examples

istioctl dashboard controlz pilot-123-456.istio-system

istioctl dashboard envoy

Open the Envoy admin dashboard for a sidecar

istioctl dashboard envoy <pod-name[.namespace]> [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--selector <string>-llabel selector (default ``)

Examples

istioctl dashboard envoy productpage-123-456.default

istioctl dashboard grafana

Open Istio's Grafana dashboard

istioctl dashboard grafana [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

istioctl dashboard grafana

istioctl dashboard jaeger

Open Istio's Jaeger dashboard

istioctl dashboard jaeger [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

istioctl dashboard jaeger

istioctl dashboard kiali

Open Istio's Kiali dashboard

istioctl dashboard kiali [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

istioctl dashboard kiali

istioctl dashboard prometheus

Open Istio's Prometheus dashboard

istioctl dashboard prometheus [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

istioctl dashboard prometheus

istioctl dashboard zipkin

Open Istio's Zipkin dashboard

istioctl dashboard zipkin [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

istioctl dashboard zipkin

istioctl deregister

De-registers a service instance

istioctl deregister <svcname> <ip> [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

# de-register an endpoint 172.17.0.2 from service my-svc:
istioctl deregister my-svc 172.17.0.2

istioctl experimental

Experimental commands that may be modified or deprecated

FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl experimental add-to-mesh

Add workloads into Istio service mesh

istioctl experimental add-to-mesh [flags]
istioctl experimental add [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--injectConfigFile <string>injection configuration filename. Cannot be used with --injectConfigMapName (default ``)
--injectConfigMapName <string>ConfigMap name for Istio sidecar injection, key should be "config". (default `istio-sidecar-injector`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--meshConfigFile <string>mesh configuration filename. Takes precedence over --meshConfigMapName if set (default ``)
--meshConfigMapName <string>ConfigMap name for Istio mesh configuration, key should be "mesh" (default `istio`)
--namespace <string>-nConfig namespace (default ``)
--valuesFile <string>injection values configuration filename. (default ``)

istioctl experimental add-to-mesh deployment

istioctl experimental add-to-mesh deployment restarts pods with the Istio sidecar. Use 'add-to-mesh' to test deployments for compatibility with Istio. If your deployment does not function after using 'add-to-mesh' you must re-deploy it and troubleshoot it for Istio compatibility. See https://istio.io/docs/setup/kubernetes/additional-setup/requirements/ THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental add-to-mesh deployment [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--injectConfigFile <string>injection configuration filename. Cannot be used with --injectConfigMapName (default ``)
--injectConfigMapName <string>ConfigMap name for Istio sidecar injection, key should be "config". (default `istio-sidecar-injector`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--meshConfigFile <string>mesh configuration filename. Takes precedence over --meshConfigMapName if set (default ``)
--meshConfigMapName <string>ConfigMap name for Istio mesh configuration, key should be "mesh" (default `istio`)
--namespace <string>-nConfig namespace (default ``)
--valuesFile <string>injection values configuration filename. (default ``)

Examples

istioctl experimental add-to-mesh deployment productpage-v1

istioctl experimental add-to-mesh external-service

istioctl experimental add-to-mesh external-service create a ServiceEntry and\ a Service without selector for the specified external service in Istio service mesh. The typical usage scenario is Mesh Expansion on VMs. THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental add-to-mesh external-service <svcname> <ip>... [name1:]port1 [name2:]port2 ... [flags]
FlagsShorthandDescription
--annotations <stringSlice>-aList of string annotations to apply if creating a service/endpoint; e.g. -a foo=bar,x=y (default `[]`)
--context <string>The name of the kubeconfig context to use (default ``)
--injectConfigFile <string>injection configuration filename. Cannot be used with --injectConfigMapName (default ``)
--injectConfigMapName <string>ConfigMap name for Istio sidecar injection, key should be "config". (default `istio-sidecar-injector`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--labels <stringSlice>-lList of labels to apply if creating a service/endpoint; e.g. -l env=prod,vers=2 (default `[]`)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--meshConfigFile <string>mesh configuration filename. Takes precedence over --meshConfigMapName if set (default ``)
--meshConfigMapName <string>ConfigMap name for Istio mesh configuration, key should be "mesh" (default `istio`)
--namespace <string>-nConfig namespace (default ``)
--serviceaccount <string>-sService account to link to the service (default `default`)
--valuesFile <string>injection values configuration filename. (default ``)

Examples

istioctl experimental add-to-mesh external-service vmhttp 172.12.23.125,172.12.23.126\
http:9080 tcp:8888 -l app=test,version=v1 -a env=stage -s stageAdmin

istioctl experimental add-to-mesh service

istioctl experimental add-to-mesh service restarts pods with the Istio sidecar. Use 'add-to-mesh' to test deployments for compatibility with Istio. If your service does not function after using 'add-to-mesh' you must re-deploy it and troubleshoot it for Istio compatibility. See https://istio.io/docs/setup/kubernetes/additional-setup/requirements/ THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental add-to-mesh service [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--injectConfigFile <string>injection configuration filename. Cannot be used with --injectConfigMapName (default ``)
--injectConfigMapName <string>ConfigMap name for Istio sidecar injection, key should be "config". (default `istio-sidecar-injector`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--meshConfigFile <string>mesh configuration filename. Takes precedence over --meshConfigMapName if set (default ``)
--meshConfigMapName <string>ConfigMap name for Istio mesh configuration, key should be "mesh" (default `istio`)
--namespace <string>-nConfig namespace (default ``)
--valuesFile <string>injection values configuration filename. (default ``)

Examples

istioctl experimental add-to-mesh service productpage

istioctl experimental analyze

Analyze Istio configuration and print validation messages (analyze has graduated. Use `istioctl analyze`)

istioctl experimental analyze <file>... [flags]
FlagsShorthandDescription
--all-namespaces-AAnalyze all namespaces
--colorDefault true. Disable with '=false' or set $TERM to dumb
--context <string>The name of the kubeconfig context to use (default ``)
--failure-threshold <Level>The severity level of analysis at which to set a non-zero exit code. Valid values: [Info Warn Error] (default `Warn`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--list-analyzers-LList the analyzers available to run. Suppresses normal execution.
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--meshConfigFile <string>Overrides the mesh config values to use for analysis. (default ``)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOutput format: one of [log json yaml] (default `log`)
--output-threshold <Level>The severity level of analysis at which to display messages. Valid values: [Info Warn Error] (default `Info`)
--recursive-RProcess directory arguments recursively. Useful when you want to analyze related manifests organized within the same directory.
--suppress <stringArray>-SSuppress reporting a message code on a specific resource. Values are supplied in the form <code>=<resource> (e.g. '--suppress "IST0102=DestinationRule primary-dr.default"'). Can be repeated. You can include the wildcard character '*' to support a partial match (e.g. '--suppress "IST0102=DestinationRule *.default" ). (default `[]`)
--timeout <duration>the duration to wait before failing (default `30s`)
--use-kube-kUse live Kubernetes cluster for analysis. Set --use-kube=false to analyze files only.
--verbose-vEnable verbose output

Examples


# Analyze the current live cluster
istioctl analyze

# Analyze the current live cluster, simulating the effect of applying additional yaml files
istioctl analyze a.yaml b.yaml my-app-config/

# Analyze the current live cluster, simulating the effect of applying a directory of config recursively
istioctl analyze --recursive my-istio-config/

# Analyze yaml files without connecting to a live cluster
istioctl analyze --use-kube=false a.yaml b.yaml my-app-config/

# Analyze the current live cluster and suppress PodMissingProxy for pod mypod in namespace 'testing'.
istioctl analyze -S "IST0103=Pod mypod.testing"

# Analyze the current live cluster and suppress PodMissingProxy for all pods in namespace 'testing',
# and suppress MisplacedAnnotation on deployment foobar in namespace default.
istioctl analyze -S "IST0103=Pod *.testing" -S "IST0107=Deployment foobar.default"

# List available analyzers
istioctl analyze -L

istioctl experimental authz

Commands to inspect and interact with the authorization policies check - check Envoy config dump for authorization configuration convert - convert v1alpha1 RBAC policies to v1beta1 authorization policies

FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

  # Check Envoy authorization configuration for pod httpbin-88ddbcfdd-nt5jb:
  istioctl x authz check httpbin-88ddbcfdd-nt5jb

  # Convert the v1alpha1 RBAC policies in the current cluster:
  istioctl x authz convert > authorization-policies.yaml

  # Convert the v1alpha1 RBAC policies in the file with the given services and root namespace:
  istioctl x authz convert -f rbac-policies.yaml -s my-service.yaml -r istio-system > authorization-policies.yaml

istioctl experimental authz check

Check reads the Envoy config dump and checks the filter configuration related to authorization. For example, it shows whether or not the Envoy is configured with authorization and the rules used in the authorization.

The Envoy config dump could be provided either by pod name or from a config dump file (the whole output of http://localhost:15000/config_dump of an Envoy instance).

THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental authz check <pod-name>[.<pod-namespace>] [flags]
FlagsShorthandDescription
--all-aShow additional information (e.g. SNI and ALPN)
--context <string>The name of the kubeconfig context to use (default ``)
--file <string>-fThe json file with Envoy config dump to be checked (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

  # Check Envoy authorization configuration for pod httpbin-88ddbcfdd-nt5jb:
  istioctl x authz check httpbin-88ddbcfdd-nt5jb

  # Check Envoy authorization configuration from a config dump file:
  istioctl x authz check -f httpbin_config_dump.json

istioctl experimental authz convert

Convert Istio v1alpha1 RBAC policy to v1beta1 authorization policy. By default, The command talks to Istio Pilot and Kubernetes API server to get all the information needed for the conversion, including the v1alpha1 RBAC policies in the current cluster, the value of the root namespace and the Kubernetes services that provide the mapping from the service name to workload selector.

The tool can also be used in an offline mode when specified with flag -f. In this mode, the tool doesn't access the network and all needed information is provided through the command line.

Note: The converter tool makes a best effort attempt to keep the syntax unchanged during the conversion. However, in some cases, strict mapping with equivalent syntax is not possible (e.g., constraints no longer supported in the new workload oriented model).

PLEASE ALWAYS REVIEW THE CONVERTED POLICIES BEFORE APPLYING.

istioctl experimental authz convert [flags]
FlagsShorthandDescription
--allowNoClusterRbacConfigContinue the conversion even if there is no ClusterRbacConfig in the cluster
--context <string>The name of the kubeconfig context to use (default ``)
--file <stringSlice>-fThe yaml file with v1alpha1 RBAC policies to be converted (default `[]`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--rootNamespace <string>-rOverride the root namespace used in the conversion (default `istio-system`)
--service <stringSlice>-sThe yaml file with Kubernetes services for the mapping from the service name to workload selector, used with -f (default `[]`)

Examples

  # Convert the v1alpha1 RBAC policy in the current cluster:
  istioctl x authz convert > authorization-policies.yaml

  # Convert the v1alpha1 RBAC policy in the given file: 
  istioctl x authz convert -f v1alpha1-policy-1.yaml,v1alpha1-policy-2.yaml
  -s my-services.yaml -r my-root-namespace > authorization-policies.yaml

istioctl experimental convert-ingress

(convert-ingress has graduated. Use `istioctl convert-ingress`)

istioctl experimental convert-ingress [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl experimental create-remote-secret

Create a secret with credentials to allow Istio to access remote Kubernetes apiservers

istioctl experimental create-remote-secret [flags]
FlagsShorthandDescription
--auth-plugin-config <stringToString>authenticator plug-in configuration. --auth-type=plugin must be set with this option (default `[]`)
--auth-plugin-name <string>authenticator plug-in name. --auth-type=plugin must be set with this option (default ``)
--auth-type <RemoteSecretAuthType>type of authentication to use. supported values = [bearer-token plugin] (default `bearer-token`)
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--name <string>Name of the local cluster whose credentials are stored in the secret. If a name is not specified the kube-system namespace's UUID of the local cluster will be used. (default ``)
--namespace <string>-nConfig namespace (default ``)
--service-account <string>create a secret with this service account's credentials. (default `istio-reader-service-account`)

Examples


# Create a secret to access cluster c0's apiserver and install it in cluster c1.
istioctl --Kubeconfig=c0.yaml x create-remote-secret --name c0 \
    | kubectl -n istio-system --Kubeconfig=c1.yaml apply -f -

# Delete a secret that was previously installed in c1
istioctl --Kubeconfig=c0.yaml x create-remote-secret --name c0 \
    | kubectl -n istio-system --Kubeconfig=c1.yaml delete -f -

# Create a secret access a remote cluster with an auth plugin
istioctl --Kubeconfig=c0.yaml x create-remote-secret --name c0 --auth-type=plugin --auth-plugin-name=gcp \
    | kubectl -n istio-system --Kubeconfig=c1.yaml apply -f -

istioctl experimental dashboard

(dashboard has graduated. Use `istioctl dashboard`)

istioctl experimental dashboard [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl experimental describe

Describe resource and related Istio configuration

istioctl experimental describe [flags]
istioctl experimental des [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl experimental describe pod

Analyzes pod, its Services, DestinationRules, and VirtualServices and reports the configuration objects that affect that pod.

THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental describe pod <pod> [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--ignoreUnmeshedSuppress warnings for unmeshed pods
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

istioctl experimental describe pod productpage-v1-c7765c886-7zzd4

istioctl experimental describe service

Analyzes service, pods, DestinationRules, and VirtualServices and reports the configuration objects that affect that service.

THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental describe service <svc> [flags]
istioctl experimental describe svc <svc> [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--ignoreUnmeshedSuppress warnings for unmeshed pods
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

istioctl experimental describe service productpage

istioctl experimental kube-uninject

kube-uninject is used to prevent Istio from adding a sidecar and also provides the inverse of "istioctl kube-inject -f".

istioctl experimental kube-uninject [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--filename <string>-fInput Kubernetes resource filename (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oModified output Kubernetes resource filename (default ``)

Examples


# Update resources before applying.
kubectl apply -f <(istioctl experimental kube-uninject -f <resource.yaml>)

# Create a persistent version of the deployment by removing Envoy sidecar.
istioctl experimental kube-uninject -f deployment.yaml -o deployment-uninjected.yaml

# Update an existing deployment.
kubectl get deployment -o yaml | istioctl experimental kube-uninject -f - | kubectl apply -f -

istioctl experimental metrics

Prints the metrics for the specified service(s) when running in Kubernetes.

This command finds a Prometheus pod running in the specified istio system namespace. It then executes a series of queries per requested workload to find the following top-level workload metrics: total requests per second, error rate, and request latency at p50, p90, and p99 percentiles. The query results are printed to the console, organized by workload name.

All metrics returned are from server-side reports. This means that latencies and error rates are from the perspective of the service itself and not of an individual client (or aggregate set of clients). Rates and latencies are calculated over a time interval of 1 minute.

istioctl experimental metrics <workload name>...
istioctl experimental m <workload name>...
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples


# Retrieve workload metrics for productpage-v1 workload
istioctl experimental metrics productpage-v1

# Retrieve workload metrics for various services in the different namespaces
istioctl experimental metrics productpage-v1.foo reviews-v1.bar ratings-v1.baz

istioctl experimental multicluster

Commands to assist in managing a multi-cluster mesh

FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl experimental multicluster apply

Update clusters in a multi-cluster mesh based on mesh topology

istioctl experimental multicluster apply  -f <mesh.yaml> [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--filename <string>-ffilename of the multicluster mesh description (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl experimental multicluster describe

Describe status of the multi-cluster mesh's control plane'

istioctl experimental multicluster describe -f <mesh.yaml> [--all] [flags]
FlagsShorthandDescription
--alldescribe the status of all clustersByContext in the mesh
--context <string>The name of the kubeconfig context to use (default ``)
--filename <string>-ffilename of the multicluster mesh description (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl experimental multicluster generate

generate a cluster-specific control plane configuration based on the mesh description and runtime state

istioctl experimental multicluster generate -f <mesh.yaml> [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--filename <string>-ffilename of the multicluster mesh description (default ``)
--from <string>optional source configuration to generate multicluster aware configuration from (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--wait-for-gatewayswait for all cluster's istio-ingressgateway IPs to be ready before generating configuration.

istioctl experimental post-install

Commands related to post-install

FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl experimental post-install webhook

webhook command to manage webhook configurations

FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl experimental post-install webhook disable

Disable webhook configurations

istioctl experimental post-install webhook disable [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--injectionDisable mutating webhook (default true).
--injection-config <string>The mutating webhook configuration to disable. (default `istio-sidecar-injector`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--validationDisable validating webhook (default true).
--validation-config <string>The validating webhook configuration to disable. (default `istio-galley`)

Examples


# Disable all webhooks
istioctl experimental post-install webhook disable

# Disable all webhooks except injection
istioctl experimental post-install webhook disable --injection=false

istioctl experimental post-install webhook enable

This command is used to enable webhook configurations after installing Istio. For previous Istio versions (e.g., 1.2, 1.3, etc), this command is not needed because in previous versions webhooks manage their own configurations.

istioctl experimental post-install webhook enable [flags]
FlagsShorthandDescription
--ca-bundle-file <string>PEM encoded CA bundle which will be used to validate the webhook's server certificates. If this is empty, the kube-apisever's root CA is used if it can be confirmed to have signed the webhook's certificates. This condition is sometimes true but is not guaranteed (see https://kubernetes.io/docs/reference/command-line-tools-reference/kubelet-tls-bootstrapping) (default ``)
--context <string>The name of the kubeconfig context to use (default ``)
--injectionEnable injection webhook (default true).
--injection-path <string>The file path of the injection webhook configuration. (default ``)
--injection-service <string>The service name of the injection webhook to manage. (default `istio-pilot`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--read-cert-timeout <duration>Max time for waiting the webhook certificate to be readable. (default `1m0s`)
--timeout <duration>Max time for checking the validating webhook server. If the validating webhook server is not readyin the given time, exit. Otherwise, apply the webhook configuration. (default `1m0s`)
--validationEnable validatation webhook (default true).
--validation-path <string>The file path of the validation webhook configuration. (default ``)
--validation-service <string>The service name of the validation webhook to manage. (default `istio-galley`)
--webhook-secret <string>The name of an existing Kubernetes secret of a webhook. istioctl will verify that the webhook certificate is issued by the CA certificate. (default ``)

Examples


# Enable the webhook configuration of Galley with the given webhook configuration
istioctl experimental post-install webhook enable --validation --webhook-secret istio.webhook.galley 
    --namespace istio-system --validation-path validatingwebhookconfiguration.yaml

# Enable the webhook configuration of Galley with the given webhook configuration and CA certificate
istioctl experimental post-install webhook enable --validation --webhook-secret istio.webhook.galley 
    --namespace istio-system --validation-path validatingwebhookconfiguration.yaml --ca-bundle-file ./k8s-ca-cert.pem

istioctl experimental post-install webhook status

Get webhook configurations

istioctl experimental post-install webhook status [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--injectionDisplay the injection webhook configuration.
--injection-config <string>The name of the MutatingWebhookConfiguration to display. (default `istio-sidecar-injector`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--validationDisplay the validating webhook configuration.
--validation-config <string>The name of the ValidatingWebhookConfiguration to display. (default `istio-galley`)

Examples


# Display the webhook configuration of Galley
istioctl experimental post-install webhook status --validation --validation-config istio-galley
# Display the webhook configuration of Galley and Sidecar Injector
istioctl experimental post-install webhook status --validation --validation-config istio-galley 
  --injection --injection-config istio-sidecar-injector

istioctl experimental remove-from-mesh

Remove workloads from Istio service mesh

istioctl experimental remove-from-mesh [flags]
istioctl experimental rm [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl experimental remove-from-mesh deployment

istioctl experimental remove-from-mesh deployment restarts pods with the Istio sidecar un-injected. THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental remove-from-mesh deployment [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

istioctl experimental remove-from-mesh deployment productpage-v1

istioctl experimental remove-from-mesh external-service

istioctl experimental remove-from-mesh external-service remove the ServiceEntry and\ the kubernetes Service for the specified external service(eg:services running on VM) from Istio service mesh. The typical usage scenario is Mesh Expansion on VMs. THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental remove-from-mesh external-service <svcname> [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

istioctl experimental remove-from-mesh external-service vmhttp

istioctl experimental remove-from-mesh service

istioctl experimental remove-from-mesh service restarts pods with the Istio sidecar un-injected. THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental remove-from-mesh service [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

Examples

istioctl experimental remove-from-mesh service productpage

istioctl experimental upgrade

The upgrade command checks for upgrade version eligibility and, if eligible, upgrades the Istio control plane components in-place. Warning: traffic may be disrupted during upgrade. Please ensure PodDisruptionBudgets are defined to maintain service continuity.

istioctl experimental upgrade [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--filename <stringSlice>-fPath to file containing IstioOperator custom resource (default `[]`)
--forceApply the upgrade without eligibility checks
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--skip-confirmation-yIf skip-confirmation is set, skips the prompting confirmation for value changes in this upgrade
--verboseVerbose output.
--versionsURI <string>-uURI for operator versions to Istio versions map (default ``)
--wait-wWait, if set will wait until all Pods, Services, and minimum number of Pods of a Deployment are in a ready state before the command exits. It will wait for a maximum duration of 10m0s

istioctl experimental wait

Waits for the specified condition to be true of an Istio resource.

istioctl experimental wait [flags] <type> <name>[.<namespace>]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--for <string>wait condition, must be 'distribution' or 'delete' (default `distribution`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--resource-version <string>wait for a specific version of config to become current, rather than using whatever is latest in kubernetes (default ``)
--threshold <float32>the ratio of distribution required for success (default `1`)
--timeout <duration>the duration to wait before failing (default `30s`)

Examples


# Wait until the bookinfo virtual service has been distributed to all proxies in the mesh
istioctl experimental wait --for=distribution virtualservice bookinfo.default

# Wait until 99% of the proxies receive the distribution, timing out after 5 minutes
istioctl experimental wait --for=distribution --threshold=.99 --timeout=300 virtualservice bookinfo.default

istioctl kube-inject

kube-inject manually injects the Envoy sidecar into Kubernetes workloads. Unsupported resources are left unmodified so it is safe to run kube-inject over a single file that contains multiple Service, ConfigMap, Deployment, etc. definitions for a complex application. It's best to do this when the resource is initially created.

k8s.io/docs/concepts/workloads/pods/pod-overview/#pod-templates is updated for Job, DaemonSet, ReplicaSet, Pod and Deployment YAML resource documents. Support for additional pod-based resource types can be added as necessary.

The Istio project is continually evolving so the Istio sidecar configuration may change unannounced. When in doubt re-run istioctl kube-inject on deployments to get the most up-to-date changes.

istioctl kube-inject [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--filename <string>-fInput Kubernetes resource filename (default ``)
--injectConfigFile <string>injection configuration filename. Cannot be used with --injectConfigMapName (default ``)
--injectConfigMapName <string>ConfigMap name for Istio sidecar injection, key should be "config". (default `istio-sidecar-injector`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--meshConfigFile <string>mesh configuration filename. Takes precedence over --meshConfigMapName if set (default ``)
--meshConfigMapName <string>ConfigMap name for Istio mesh configuration, key should be "mesh" (default `istio`)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oModified output Kubernetes resource filename (default ``)
--valuesFile <string>injection values configuration filename. (default ``)

Examples


# Update resources on the fly before applying.
kubectl apply -f <(istioctl kube-inject -f <resource.yaml>)

# Create a persistent version of the deployment with Envoy sidecar
# injected.
istioctl kube-inject -f deployment.yaml -o deployment-injected.yaml

# Update an existing deployment.
kubectl get deployment -o yaml | istioctl kube-inject -f - | kubectl apply -f -

# Capture cluster configuration for later use with kube-inject
kubectl -n istio-system get cm istio-sidecar-injector  -o jsonpath="{.data.config}" > /tmp/inj-template.tmpl
kubectl -n istio-system get cm istio -o jsonpath="{.data.mesh}" > /tmp/mesh.yaml
kubectl -n istio-system get cm istio-sidecar-injector -o jsonpath="{.data.values}" > /tmp/values.json
# Use kube-inject based on captured configuration
istioctl kube-inject -f samples/bookinfo/platform/kube/bookinfo.yaml \
	--injectConfigFile /tmp/inj-template.tmpl \
	--meshConfigFile /tmp/mesh.yaml \
	--valuesFile /tmp/values.json

istioctl manifest

The manifest subcommand generates, applies, diffs or migrates Istio manifests.

FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--verboseVerbose output.

istioctl manifest apply

The apply subcommand generates an Istio install manifest and applies it to a cluster.

istioctl manifest apply [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--filename <stringSlice>-fPath to file containing IstioOperator CustomResource This flag can be specified multiple times to overlay multiple files. Multiple files are overlaid in left to right order. (default `[]`)
--forceProceed even with validation errors
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--readiness-timeout <duration>Maximum seconds to wait for all Istio resources to be ready. The --wait flag must be set for this flag to apply (default `5m0s`)
--set <stringArray>-sOverride an IstioOperator value, e.g. to choose a profile (--set profile=demo), enable or disable components (--set components.policy.enabled=true), or override Istio settings (--set values.grafana.enabled=true). See documentation for more info: https://istio.io/docs/reference/config/istio.operator.v1alpha12.pb/#IstioControlPlaneSpec (default `[]`)
--skip-confirmation-yskipConfirmation determines whether the user is prompted for confirmation. If set to true, the user is not prompted and a Yes response is assumed in all cases.
--verboseVerbose output.
--wait-wWait, if set will wait until all Pods, Services, and minimum number of Pods of a Deployment are in a ready state before the command exits. It will wait for a maximum duration of --readiness-timeout seconds

Examples

  # Apply a default Istio installation
  istioctl manifest apply

  # Enable grafana dashboard
  istioctl manifest apply --set values.grafana.enabled=true

  # Generate the demo profile and don't wait for confirmation
  istioctl manifest apply --set profile=demo --skip-confirmation

  # To override a setting that includes dots, escape them with a backslash (\).  Your shell may require enclosing quotes.
  istioctl manifest apply --set "values.sidecarInjectorWebhook.injectedAnnotations.container\.apparmor\.security\.beta\.kubernetes\.io/istio-proxy=runtime/default"

istioctl manifest diff

The diff subcommand compares manifests from two files or directories.

istioctl manifest diff <file|dir> <file|dir> [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--directory-rcompare directory
--dry-runConsole/log output only, make no changes.
--ignore <string>ignoreResources ignores all listed items during comparison. It uses the same list format as selectResources (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--rename <string>renameResources identifies renamed resources before comparison. The format of each renaming pair is A->B, all renaming pairs are comma separated. e.g. Service:*:istio-pilot->Service:*:istio-control - rename istio-pilot service into istio-control (default ``)
--select <string>selectResources constrains the list of resources to compare to only the ones in this list, ignoring all others. The format of each list item is "::" and the items are comma separated. The "*" character represents wildcard selection. e.g. Deployment:istio-system:* - compare all deployments in istio-system namespace Service:*:istio-pilot - compare Services called "istio-pilot" in all namespaces (default `::`)
--verboseVerbose output.

istioctl manifest generate

The generate subcommand generates an Istio install manifest and outputs to the console by default.

istioctl manifest generate [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--filename <stringSlice>-fPath to file containing IstioOperator CustomResource This flag can be specified multiple times to overlay multiple files. Multiple files are overlaid in left to right order. (default `[]`)
--forceProceed even with validation errors
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--output <string>-oManifest output directory path (default ``)
--set <stringArray>-sOverride an IstioOperator value, e.g. to choose a profile (--set profile=demo), enable or disable components (--set components.policy.enabled=true), or override Istio settings (--set values.grafana.enabled=true). See documentation for more info: https://istio.io/docs/reference/config/istio.operator.v1alpha12.pb/#IstioControlPlaneSpec (default `[]`)
--verboseVerbose output.

Examples

  # Generate a default Istio installation
  istioctl manifest generate

  # Enable grafana dashboard
  istioctl manifest generate --set values.grafana.enabled=true

  # Generate the demo profile
  istioctl manifest generate --set profile=demo

  # To override a setting that includes dots, escape them with a backslash (\).  Your shell may require enclosing quotes.
  istioctl manifest generate --set "values.sidecarInjectorWebhook.injectedAnnotations.container\.apparmor\.security\.beta\.kubernetes\.io/istio-proxy=runtime/default"

istioctl manifest migrate

The migrate subcommand migrates a configuration from Helm values or IstioControlPlane format to IstioOperator format.

istioctl manifest migrate [<filepath>] [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--forceProceed even with validation errors
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--verboseVerbose output.

istioctl manifest versions

List the versions of Istio recommended for use or supported for upgrade by this version of the operator binary.

istioctl manifest versions [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--verboseVerbose output.
--versionsURI <string>-uURI for operator versions to Istio versions map (default ``)

istioctl operator

The operator subcommand installs, removes and shows the status of the operator controller.

FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)

istioctl operator init

The init subcommand installs the Istio operator controller in the cluster.

istioctl operator init [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--filename <string>-fPath to file containing IstioOperator CustomResource This flag can be specified multiple times to overlay multiple files. Multiple files are overlaid in left to right order. (default ``)
--hub <string>The hub for the operator controller image (default `unknown`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--operatorNamespace <string>The namespace the operator controller is installed into (default `istio-operator`)
--readiness-timeout <duration>Maximum seconds to wait for the Istio operator to be ready. The --wait flag must be set for this flag to apply (default `5m0s`)
--tag <string>The tag for the operator controller image (default `unknown`)
--verboseVerbose output.
--wait-wWait, if set will wait until all Pods, Services, and minimum number of Pods of a Deployment are in a ready state before the command exits. It will wait for a maximum duration of --readiness-timeout seconds

istioctl operator remove

The remove subcommand removes the Istio operator controller from the cluster.

istioctl operator remove [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--filename <string>-fPath to file containing IstioOperator CustomResource This flag can be specified multiple times to overlay multiple files. Multiple files are overlaid in left to right order. (default ``)
--forceProceed even with errors
--hub <string>The hub for the operator controller image (default `unknown`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--operatorNamespace <string>The namespace the operator controller is installed into (default `istio-operator`)
--readiness-timeout <duration>Maximum seconds to wait for the Istio operator to be ready. The --wait flag must be set for this flag to apply (default `5m0s`)
--tag <string>The tag for the operator controller image (default `unknown`)
--verboseVerbose output.
--wait-wWait, if set will wait until all Pods, Services, and minimum number of Pods of a Deployment are in a ready state before the command exits. It will wait for a maximum duration of --readiness-timeout seconds

istioctl profile

The profile subcommand lists, dumps or diffs Istio configuration profiles.

FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--verboseVerbose output.

istioctl profile diff

The diff subcommand displays the differences between two Istio configuration profiles.

istioctl profile diff <file1.yaml> <file2.yaml> [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--verboseVerbose output.

istioctl profile dump

The dump subcommand dumps the values in an Istio configuration profile.

istioctl profile dump [<profile>] [flags]
FlagsShorthandDescription
--config-path <string>-pThe path the root of the configuration subtree to dump e.g. trafficManagement.components.pilot. By default, dump whole tree (default ``)
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--filename <stringSlice>-fPath to file containing IstioOperator CustomResource This flag can be specified multiple times to overlay multiple files. Multiple files are overlaid in left to right order. (default `[]`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOutput format: one of json|yaml (default `yaml`)
--verboseVerbose output.

istioctl profile list

The list subcommand lists the available Istio configuration profiles.

istioctl profile list [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--verboseVerbose output.

istioctl proxy-config

A group of commands used to retrieve information about proxy configuration from the Envoy config dump

FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOutput format: one of json|short (default `short`)

Examples

  # Retrieve information about proxy configuration from an Envoy instance.
  istioctl proxy-config <clusters|listeners|routes|endpoints|bootstrap> <pod-name[.namespace]>

istioctl proxy-config bootstrap

Retrieve information about bootstrap configuration for the Envoy instance in the specified pod.

istioctl proxy-config bootstrap [<pod-name[.namespace]>] [flags]
istioctl proxy-config b [<pod-name[.namespace]>] [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--file <string>-fEnvoy config dump JSON file (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOutput format: one of json|short (default `short`)

Examples

  # Retrieve full bootstrap configuration for a given pod from Envoy.
  istioctl proxy-config bootstrap <pod-name[.namespace]>

  # Retrieve full bootstrap without using Kubernetes API
  ssh <user@hostname> 'curl localhost:15000/config_dump' > envoy-config.json
  istioctl proxy-config bootstrap --file envoy-config.json

istioctl proxy-config cluster

Retrieve information about cluster configuration for the Envoy instance in the specified pod.

istioctl proxy-config cluster [<pod-name[.namespace]>] [flags]
istioctl proxy-config clusters [<pod-name[.namespace]>] [flags]
istioctl proxy-config c [<pod-name[.namespace]>] [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--direction <string>Filter clusters by Direction field (default ``)
--file <string>-fEnvoy config dump JSON file (default ``)
--fqdn <string>Filter clusters by substring of Service FQDN field (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOutput format: one of json|short (default `short`)
--port <int>Filter clusters by Port field (default `0`)
--subset <string>Filter clusters by substring of Subset field (default ``)

Examples

  # Retrieve summary about cluster configuration for a given pod from Envoy.
  istioctl proxy-config clusters <pod-name[.namespace]>

  # Retrieve cluster summary for clusters with port 9080.
  istioctl proxy-config clusters <pod-name[.namespace]> --port 9080

  # Retrieve full cluster dump for clusters that are inbound with a FQDN of details.default.svc.cluster.local.
  istioctl proxy-config clusters <pod-name[.namespace]> --fqdn details.default.svc.cluster.local --direction inbound -o json

  # Retrieve cluster summary without using Kubernetes API
  ssh <user@hostname> 'curl localhost:15000/config_dump' > envoy-config.json
  istioctl proxy-config clusters --file envoy-config.json

istioctl proxy-config endpoint

Retrieve information about endpoint configuration for the Envoy instance in the specified pod.

istioctl proxy-config endpoint [<pod-name[.namespace]>] [flags]
istioctl proxy-config endpoints [<pod-name[.namespace]>] [flags]
istioctl proxy-config ep [<pod-name[.namespace]>] [flags]
FlagsShorthandDescription
--address <string>Filter endpoints by address field (default ``)
--cluster <string>Filter endpoints by cluster name field (default ``)
--context <string>The name of the kubeconfig context to use (default ``)
--file <string>-fEnvoy config dump JSON file (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOutput format: one of json|short (default `short`)
--port <int>Filter endpoints by Port field (default `0`)
--status <string>Filter endpoints by status field (default ``)

Examples

  # Retrieve full endpoint configuration for a given pod from Envoy.
  istioctl proxy-config endpoint <pod-name[.namespace]>

  # Retrieve endpoint summary for endpoint with port 9080.
  istioctl proxy-config endpoint <pod-name[.namespace]> --port 9080

  # Retrieve full endpoint with a address (172.17.0.2).
  istioctl proxy-config endpoint <pod-name[.namespace]> --address 172.17.0.2 -o json

  # Retrieve full endpoint with a cluster name (outbound|9411||zipkin.istio-system.svc.cluster.local).
  istioctl proxy-config endpoint <pod-name[.namespace]> --cluster "outbound|9411||zipkin.istio-system.svc.cluster.local" -o json
  # Retrieve full endpoint with the status (healthy).
  istioctl proxy-config endpoint <pod-name[.namespace]> --status healthy -ojson

  # Retrieve endpoint summary without using Kubernetes API
  ssh <user@hostname> 'curl localhost:15000/clusters?format=json' > envoy-clusters.json
  istioctl proxy-config endpoints --file envoy-clusters.json

istioctl proxy-config listener

Retrieve information about listener configuration for the Envoy instance in the specified pod.

istioctl proxy-config listener [<pod-name[.namespace]>] [flags]
istioctl proxy-config listeners [<pod-name[.namespace]>] [flags]
istioctl proxy-config l [<pod-name[.namespace]>] [flags]
FlagsShorthandDescription
--address <string>Filter listeners by address field (default ``)
--context <string>The name of the kubeconfig context to use (default ``)
--file <string>-fEnvoy config dump JSON file (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOutput format: one of json|short (default `short`)
--port <int>Filter listeners by Port field (default `0`)
--type <string>Filter listeners by type field (default ``)

Examples

  # Retrieve summary about listener configuration for a given pod from Envoy.
  istioctl proxy-config listeners <pod-name[.namespace]>

  # Retrieve listener summary for listeners with port 9080.
  istioctl proxy-config listeners <pod-name[.namespace]> --port 9080

  # Retrieve full listener dump for HTTP listeners with a wildcard address (0.0.0.0).
  istioctl proxy-config listeners <pod-name[.namespace]> --type HTTP --address 0.0.0.0 -o json

  # Retrieve listener summary without using Kubernetes API
  ssh <user@hostname> 'curl localhost:15000/config_dump' > envoy-config.json
  istioctl proxy-config listeners --file envoy-config.json

istioctl proxy-config log

(experimental) Retrieve information about logging levels of the Envoy instance in the specified pod, and update optionally

istioctl proxy-config log <pod-name[.namespace]> [flags]
istioctl proxy-config o <pod-name[.namespace]> [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--level <string>Comma-separated minimum per-logger level of messages to output, in the form of [<logger>:]<level>,[<logger>:]<level>,... where logger can be one of admin, aws, assert, backtrace, client, config, connection, conn_handler, dubbo, file, filter, forward_proxy, grpc, hc, health_checker, http, http2, hystrix, init, io, jwt, kafka, lua, main, misc, mongo, quic, pool, rbac, redis, router, runtime, stats, secret, tap, testing, thrift, tracing, upstream, udp, wasm and level can be one of [trace, debug, info, warning, error, critical, off] (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOutput format: one of json|short (default `short`)
--reset-rReset levels to default value (warning).

Examples

  # Retrieve information about logging levels for a given pod from Envoy.
  istioctl proxy-config log <pod-name[.namespace]>

  # Update levels of the all loggers
  istioctl proxy-config log <pod-name[.namespace]> --level none

  # Update levels of the specified loggers.
  istioctl proxy-config log <pod-name[.namespace]> --level http:debug,redis:debug

  # Reset levels of all the loggers to default value (warning).
  istioctl proxy-config log <pod-name[.namespace]> -r

istioctl proxy-config route

Retrieve information about route configuration for the Envoy instance in the specified pod.

istioctl proxy-config route [<pod-name[.namespace]>] [flags]
istioctl proxy-config routes [<pod-name[.namespace]>] [flags]
istioctl proxy-config r [<pod-name[.namespace]>] [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--file <string>-fEnvoy config dump JSON file (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--name <string>Filter listeners by route name field (default ``)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOutput format: one of json|short (default `short`)

Examples

  # Retrieve summary about route configuration for a given pod from Envoy.
  istioctl proxy-config routes <pod-name[.namespace]>

  # Retrieve route summary for route 9080.
  istioctl proxy-config route <pod-name[.namespace]> --name 9080

  # Retrieve full route dump for route 9080
  istioctl proxy-config route <pod-name[.namespace]> --name 9080 -o json

  # Retrieve route summary without using Kubernetes API
  ssh <user@hostname> 'curl localhost:15000/config_dump' > envoy-config.json
  istioctl proxy-config routes --file envoy-config.json

istioctl proxy-config secret

(experimental) Retrieve information about secret configuration for the Envoy instance in the specified pod.

istioctl proxy-config secret [<pod-name[.namespace]>] [flags]
istioctl proxy-config s [<pod-name[.namespace]>] [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--file <string>-fEnvoy config dump JSON file (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOutput format: one of json|short (default `short`)

Examples

  # Retrieve full secret configuration for a given pod from Envoy.
  istioctl proxy-config secret <pod-name[.namespace]>

  # Retrieve full bootstrap without using Kubernetes API
  ssh <user@hostname> 'curl localhost:15000/config_dump' > envoy-config.json
  istioctl proxy-config secret --file envoy-config.json

THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl proxy-status

Retrieves last sent and last acknowledged xDS sync from Pilot to each Envoy in the mesh

istioctl proxy-status [<pod-name[.namespace]>] [flags]
istioctl ps [<pod-name[.namespace]>] [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--sds-s(experimental) Retrieve synchronization between active secrets on Envoy instance with those on corresponding node agents
--sds-jsonDetermines whether SDS dump outputs JSON

Examples

# Retrieve sync status for all Envoys in a mesh
	istioctl proxy-status

# Retrieve sync diff for a single Envoy and Pilot
	istioctl proxy-status istio-egressgateway-59585c5b9c-ndc59.istio-system

istioctl register

Registers a service instance (e.g. VM) joining the mesh

istioctl register <svcname> <ip> [name1:]port1 [name2:]port2 ... [flags]
FlagsShorthandDescription
--annotations <stringSlice>-aList of string annotations to apply if creating a service/endpoint; e.g. -a foo=bar,test,x=y (default `[]`)
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--labels <stringSlice>-lList of labels to apply if creating a service/endpoint; e.g. -l env=prod,vers=2 (default `[]`)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--serviceaccount <string>-sService account to link to the service (default `default`)

istioctl upgrade

The upgrade command checks for upgrade version eligibility and, if eligible, upgrades the Istio control plane components in-place. Warning: traffic may be disrupted during upgrade. Please ensure PodDisruptionBudgets are defined to maintain service continuity.

istioctl upgrade [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--dry-runConsole/log output only, make no changes.
--filename <stringSlice>-fPath to file containing IstioOperator custom resource (default `[]`)
--forceApply the upgrade without eligibility checks
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--logtostderrSend logs to stderr.
--namespace <string>-nConfig namespace (default ``)
--skip-confirmation-yIf skip-confirmation is set, skips the prompting confirmation for value changes in this upgrade
--verboseVerbose output.
--versionsURI <string>-uURI for operator versions to Istio versions map (default ``)
--wait-wWait, if set will wait until all Pods, Services, and minimum number of Pods of a Deployment are in a ready state before the command exits. It will wait for a maximum duration of 10m0s

istioctl validate

Validate Istio policy and rules (NOTE: validate is deprecated and will be removed in 1.6. Use 'istioctl analyze' to validate configuration.)

istioctl validate -f FILENAME [options] [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--filename <stringSlice>-fNames of files to validate (default `[]`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--referential-xEnable structural validation for policy and telemetry

Examples


		# Validate bookinfo-gateway.yaml
		istioctl validate -f bookinfo-gateway.yaml
		
		# Validate current deployments under 'default' namespace within the cluster
		kubectl get deployments -o yaml |istioctl validate -f -

		# Validate current services under 'default' namespace within the cluster
		kubectl get services -o yaml |istioctl validate -f -

		# Also see the related command 'istioctl analyze'
		istioctl analyze samples/bookinfo/networking/bookinfo-gateway.yaml

istioctl verify-install

verify-install verifies Istio installation status against the installation file you specified when you installed Istio. It loops through all the installation resources defined in your installation file and reports whether all of them are in ready status. It will report failure when any of them are not ready.

If you do not specify installation file it will perform pre-check for your cluster and report whether the cluster is ready for Istio installation.

istioctl verify-install [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--enableVerboseEnable verbose output
--filename <stringSlice>-fIstio YAML installation file. (default `[]`)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--recursive-RProcess the directory used in -f, --filename recursively. Useful when you want to manage related manifests organized within the same directory.

Examples


		# Verify that Istio can be freshly installed
		istioctl verify-install
		
		# Verify the deployment matches a custom Istio deployment configuration
		istioctl verify-install -f $HOME/istio.yaml

istioctl version

Prints out build version information

istioctl version [flags]
FlagsShorthandDescription
--context <string>The name of the kubeconfig context to use (default ``)
--istioNamespace <string>-iIstio system namespace (default `istio-system`)
--kubeconfig <string>-cKubernetes configuration file (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, cache, citadelclient, configmapcontroller, default, googleca, grpcAdapter, installer, mcp, model, patch, processing, rbac, resource, sds, secretfetcher, source, stsclient, tpath, translator, util, validation, vault] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info,validation:error,processing:error,source:error,analysis:warn,installer:warn,translator:warn`)
--namespace <string>-nConfig namespace (default ``)
--output <string>-oOne of 'yaml' or 'json'. (default ``)
--remoteUse --remote=false to suppress control plane check
--short-sUse --short=false to generate full version information

Environment variables

These environment variables affect the behavior of the istioctl command.
Variable NameTypeDefault ValueDescription
BYPASS_OOP_MTLS_SAN_VERIFICATIONBooleanfalseWhether or not to validate SANs for out-of-process adapters auth.
GKE_CLUSTER_URLStringThe url of GKE cluster
INGRESS_GATEWAY_FALLBACK_SECRETStringgateway-fallback
INGRESS_GATEWAY_NAMESPACEString
ISTIOD_ADDRStringService name of istiod. If empty the istiod listener, certs will be disabled.
ISTIO_GPRC_MAXRECVMSGSIZEInteger4194304Sets the max receive buffer size of gRPC stream in bytes.
ISTIO_GPRC_MAXSTREAMSInteger100000Sets the maximum number of concurrent grpc streams.
ISTIO_LANGStringSelects the attribute expression language runtime for Mixer.
JWT_POLICYStringthird-party-jwtThe JWT validation policy.
K8S_INGRESS_NSString
NAMESPACEStringistio-systemnamespace that nodeagent/citadel run in
PILOT_BLOCK_HTTP_ON_443BooleantrueIf enabled, any HTTP services will be blocked on HTTPS port (443). If this is disabled, any HTTP service on port 443 could block all external traffic
PILOT_CERT_DIRString
PILOT_CERT_PROVIDERStringistiodthe provider of Pilot DNS certificate.
PILOT_DEBOUNCE_AFTERTime Duration100msThe delay added to config/registry events for debouncing. This will delay the push by at least this internal. If no change is detected within this period, the push will happen, otherwise we'll keep delaying until things settle, up to a max of PILOT_DEBOUNCE_MAX.
PILOT_DEBOUNCE_MAXTime Duration10sThe maximum amount of time to wait for events while debouncing. If events keep showing up with no breaks for this time, we'll trigger a push.
PILOT_DEBUG_ADSZ_CONFIGBooleanfalse
PILOT_DISABLE_XDS_MARSHALING_TO_ANYBooleanfalse
PILOT_DISTRIBUTION_HISTORY_RETENTIONTime Duration1m0sIf enabled, Pilot will keep track of old versions of distributed config for this duration.
PILOT_ENABLE_CONFIG_DISTRIBUTION_TRACKINGBooleantrueIf enabled, Pilot will assign meaningful nonces to each Envoy configuration message, and allow users to interrogate which envoy has which config from the debug interface.
PILOT_ENABLE_CRD_VALIDATIONBooleanfalseIf enabled, pilot will validate CRDs while retrieving CRDs from kubernetes cache.Use this flag to enable validation of CRDs in Pilot, especially in deployments that do not have galley installed.
PILOT_ENABLE_EDS_DEBOUNCEBooleantrueIf enabled, Pilot will include EDS pushes in the push debouncing, configured by PILOT_DEBOUNCE_AFTER and PILOT_DEBOUNCE_MAX. EDS pushes may be delayed, but there will be fewer pushes. By default this is enabled
PILOT_ENABLE_EDS_FOR_HEADLESS_SERVICESBooleanfalseIf enabled, for headless service in Kubernetes, pilot will send endpoints over EDS, allowing the sidecar to load balance among pods in the headless service. This feature should be enabled if applications access all services explicitly via a HTTP proxy port in the sidecar.
PILOT_ENABLE_FALLTHROUGH_ROUTEBooleantrueEnableFallthroughRoute provides an option to add a final wildcard match for routes. When ALLOW_ANY traffic policy is used, a Passthrough cluster is used. When REGISTRY_ONLY traffic policy is used, a 502 error is returned.
PILOT_ENABLE_HEADLESS_SERVICE_POD_LISTENERSBooleantrueIf enabled, for a headless service/stateful set in Kubernetes, pilot will generate an outbound listener for each pod in a headless service. This feature should be disabled if headless services have a large number of pods.
PILOT_ENABLE_MYSQL_FILTERBooleanfalseEnableMysqlFilter enables injection of `envoy.filters.network.mysql_proxy` in the filter chain.
PILOT_ENABLE_PROTOCOL_SNIFFING_FOR_INBOUNDBooleantrueIf enabled, protocol sniffing will be used for inbound listeners whose port protocol is not specified or unsupported
PILOT_ENABLE_PROTOCOL_SNIFFING_FOR_OUTBOUNDBooleantrueIf enabled, protocol sniffing will be used for outbound listeners whose port protocol is not specified or unsupported
PILOT_ENABLE_REDIS_FILTERBooleanfalseEnableRedisFilter enables injection of `envoy.filters.network.redis_proxy` in the filter chain.
PILOT_ENABLE_TCP_METADATA_EXCHANGEBooleantrueIf enabled, metadata exchange will be enabled for TCP using ALPN and Network Metadata Exchange filters in Envoy
PILOT_FILTER_GATEWAY_CLUSTER_CONFIGBooleanfalse
PILOT_HTTP10BooleanfalseEnables the use of HTTP 1.0 in the outbound HTTP listeners, to support legacy applications.
PILOT_INBOUND_PROTOCOL_DETECTION_TIMEOUTTime Duration1sProtocol detection timeout for inbound listener
PILOT_INITIAL_FETCH_TIMEOUTTime Duration0sSpecifies the initial_fetch_timeout for config. If this time is reached without a response to the config requested by Envoy, the Envoy will move on with the init phase. This prevents envoy from getting stuck waiting on config during startup.
PILOT_PUSH_THROTTLEInteger100Limits the number of concurrent pushes allowed. On larger machines this can be increased for faster pushes
PILOT_RESPECT_DNS_TTLBooleantrueIf enabled, DNS based clusters will respect the TTL of the DNS, rather than polling at a fixed rate. This option is only provided for backward compatibility purposes and will be removed in the near future.
PILOT_RESTRICT_POD_UP_TRAFFIC_LOOPBooleantrueIf enabled, this will block inbound traffic from matching outbound listeners, which could result in an infinite loop of traffic. This option is only provided for backward compatibility purposes and will be removed in the near future.
PILOT_SCOPE_GATEWAY_TO_NAMESPACEBooleanfalseIf enabled, a gateway workload can only select gateway resources in the same namespace. Gateways with same selectors in different namespaces will not be applicable.
PILOT_SCOPE_PUSHESBooleantrueIf enabled, pilot will attempt to limit unnecessary pushes by determining what proxies a config or endpoint update will impact.
PILOT_SIDECAR_USE_REMOTE_ADDRESSBooleanfalseUseRemoteAddress sets useRemoteAddress to true for side car outbound listeners.
PILOT_SKIP_VALIDATE_TRUST_DOMAINBooleanfalseSkip validating the peer is from the same trust domain when mTLS is enabled in authentication policy
PILOT_TRACE_SAMPLINGFloating-Point100Sets the mesh-wide trace sampling percentage. Should be 0.0 - 100.0. Precision to 0.01. Default is 100, not recommended for production use.
PILOT_USE_ENDPOINT_SLICEBooleanfalseIf enabled, Pilot will use EndpointSlices as the source of endpoints for Kubernetes services. By default, this is false, and Endpoints will be used. This requires the Kubernetes EndpointSlice controller to be enabled. Currently this is mutual exclusive - either Endpoints or EndpointSlices will be used
PROV_CERTStringSet to a directory containing provisioned certs, for VMs
SECRET_WATCHER_RESYNC_PERIODString
TERMStringSpecifies terminal type. Use 'dumb' to suppress color output
TERMINATION_DRAIN_DURATION_SECONDSInteger5The amount of time allowed for connections to complete on pilot-agent shutdown. On receiving SIGTERM or SIGINT, pilot-agent tells the active Envoy to start draining, preventing any new connections and allowing existing connections to complete. It then sleeps for the TerminationDrainDuration and then kills any remaining active Envoy processes.
USE_ISTIO_JWT_FILTERBooleanfalseUse the Istio JWT filter for JWT token verification.

Exported metrics

Metric NameTypeDescription
endpoint_no_podLastValueEndpoints without an associated pod.
galley_runtime_processor_event_span_duration_millisecondsDistributionThe duration between each incoming event
galley_runtime_processor_events_processed_totalCountThe number of events that have been processed
galley_runtime_processor_snapshot_events_totalDistributionThe number of events per snapshot
galley_runtime_processor_snapshot_lifetime_duration_millisecondsDistributionThe duration of each snapshot
galley_runtime_processor_snapshots_published_totalCountThe number of snapshots that have been published
galley_runtime_state_type_instances_totalLastValueThe number of type instances per type URL
galley_runtime_strategy_on_change_totalCountThe number of times the strategy's onChange has been called
galley_runtime_strategy_timer_max_time_reached_totalCountThe number of times the max time has been reached
galley_runtime_strategy_timer_quiesce_reached_totalCountThe number of times a quiesce has been reached
galley_runtime_strategy_timer_resets_totalCountThe number of times the timer has been reset
galley_source_kube_dynamic_converter_failure_totalCountThe number of times a dynamnic kubernetes source failed converting a resources
galley_source_kube_dynamic_converter_success_totalCountThe number of times a dynamic kubernetes source successfully converted a resource
galley_source_kube_event_error_totalCountThe number of times a kubernetes source encountered errored while handling an event
galley_source_kube_event_success_totalCountThe number of times a kubernetes source successfully handled an event
istio_buildLastValueIstio component build info
istio_mcp_clients_totalLastValueThe number of streams currently connected.
istio_mcp_message_sizes_bytesDistributionSize of messages received from clients.
istio_mcp_reconnectionsSumThe number of times the sink has reconnected.
istio_mcp_recv_failures_totalSumThe number of recv failures in the source.
istio_mcp_request_acks_totalSumThe number of request acks received by the source.
istio_mcp_request_nacks_totalSumThe number of request nacks received by the source.
istio_mcp_send_failures_totalSumThe number of send failures in the source.
mixer_config_adapter_info_config_errors_totalLastValueThe number of errors encountered during processing of the adapter info configuration.
mixer_config_adapter_info_configs_totalLastValueThe number of known adapters in the current config.
mixer_config_attributes_totalLastValueThe number of known attributes in the current config.
mixer_config_handler_configs_totalLastValueThe number of known handlers in the current config.
mixer_config_handler_validation_error_totalLastValueThe number of errors encountered because handler validation returned error.
mixer_config_instance_config_errors_totalLastValueThe number of errors encountered during processing of the instance configuration.
mixer_config_instance_configs_totalLastValueThe number of known instances in the current config.
mixer_config_rule_config_errors_totalLastValueThe number of errors encountered during processing of the rule configuration.
mixer_config_rule_config_match_error_totalLastValueThe number of rule conditions that was not parseable.
mixer_config_rule_configs_totalLastValueThe number of known rules in the current config.
mixer_config_template_config_errors_totalLastValueThe number of errors encountered during processing of the template configuration.
mixer_config_template_configs_totalLastValueThe number of known templates in the current config.
mixer_config_unsatisfied_action_handler_totalLastValueThe number of actions that failed due to handlers being unavailable.
mixer_dispatcher_destinations_per_requestDistributionNumber of handlers dispatched per request by Mixer
mixer_dispatcher_destinations_per_variety_totalLastValueNumber of Mixer adapter destinations by template variety type
mixer_dispatcher_instances_per_requestDistributionNumber of instances created per request by Mixer
mixer_handler_closed_handlers_totalLastValueThe number of handlers that were closed during config transition.
mixer_handler_daemons_totalLastValueThe current number of active daemon routines in a given adapter environment.
mixer_handler_handler_build_failures_totalLastValueThe number of handlers that failed creation during config transition.
mixer_handler_handler_close_failures_totalLastValueThe number of errors encountered while closing handlers during config transition.
mixer_handler_new_handlers_totalLastValueThe number of handlers that were newly created during config transition.
mixer_handler_reused_handlers_totalLastValueThe number of handlers that were re-used during config transition.
mixer_handler_workers_totalLastValueThe current number of active worker routines in a given adapter environment.
mixer_runtime_dispatch_duration_secondsDistributionDuration in seconds for adapter dispatches handled by Mixer.
mixer_runtime_dispatches_totalCountTotal number of adapter dispatches handled by Mixer.
num_failed_outgoing_requestsSumNumber of failed outgoing requests (e.g. to a token exchange server, CA, etc.)
num_outgoing_requestsSumNumber of total outgoing requests (e.g. to a token exchange server, CA, etc.)
num_outgoing_retriesSumNumber of outgoing retry requests (e.g. to a token exchange server, CA, etc.)
outgoing_latencySumThe latency of outgoing requests (e.g. to a token exchange server, CA, etc.) in milliseconds.
pilot_conflict_inbound_listenerLastValueNumber of conflicting inbound listeners.
pilot_conflict_outbound_listener_http_over_current_tcpLastValueNumber of conflicting wildcard http listeners with current wildcard tcp listener.
pilot_conflict_outbound_listener_http_over_httpsLastValueNumber of conflicting HTTP listeners with well known HTTPS ports
pilot_conflict_outbound_listener_tcp_over_current_httpLastValueNumber of conflicting wildcard tcp listeners with current wildcard http listener.
pilot_conflict_outbound_listener_tcp_over_current_tcpLastValueNumber of conflicting tcp listeners with current tcp listener.
pilot_destrule_subsetsLastValueDuplicate subsets across destination rules for same host
pilot_duplicate_envoy_clustersLastValueDuplicate envoy clusters caused by service entries with same hostname
pilot_eds_no_instancesLastValueNumber of clusters without instances.
pilot_endpoint_not_readyLastValueEndpoint found in unready state.
pilot_inbound_updatesSumTotal number of updates received by pilot.
pilot_invalid_out_listenersLastValueNumber of invalid outbound listeners.
pilot_jwks_resolver_network_fetch_fail_totalSumTotal number of failed network fetch by pilot jwks resolver
pilot_jwks_resolver_network_fetch_success_totalSumTotal number of successfully network fetch by pilot jwks resolver
pilot_k8s_cfg_eventsSumEvents from k8s config.
pilot_k8s_endpoints_with_no_podsSumEndpoints that does not have any corresponding pods.
pilot_k8s_object_errorsLastValueErrors converting k8s CRDs
pilot_k8s_reg_eventsSumEvents from k8s registry.
pilot_no_ipLastValuePods not found in the endpoint table, possibly invalid.
pilot_proxy_convergence_timeDistributionDelay in seconds between config change and a proxy receiving all required configuration.
pilot_proxy_queue_timeDistributionTime in seconds, a proxy is in the push queue before being dequeued.
pilot_push_triggersSumTotal number of times a push was triggered, labeled by reason for the push.
pilot_rds_expired_nonceSumTotal number of RDS messages with an expired nonce.
pilot_servicesLastValueTotal services known to pilot.
pilot_total_k8s_object_errorsSumTotal Errors converting k8s CRDs
pilot_total_rejected_configsSumTotal number of configs that Pilot had to reject or ignore.
pilot_total_xds_internal_errorsSumTotal number of internal XDS errors in pilot.
pilot_total_xds_rejectsSumTotal number of XDS responses from pilot rejected by proxy.
pilot_virt_servicesLastValueTotal virtual services known to pilot.
pilot_vservice_dup_domainLastValueVirtual services with dup domains.
pilot_xdsLastValueNumber of endpoints connected to this pilot using XDS.
pilot_xds_cds_rejectLastValuePilot rejected CDS configs.
pilot_xds_eds_all_locality_endpointsLastValueNetwork endpoints for each cluster(across all localities), as of last push. Zero endpoints is an error.
pilot_xds_eds_instancesLastValueInstances for each cluster(grouped by locality), as of last push. Zero instances is an error.
pilot_xds_eds_rejectLastValuePilot rejected EDS.
pilot_xds_lds_rejectLastValuePilot rejected LDS.
pilot_xds_push_context_errorsSumNumber of errors (timeouts) initiating push context.
pilot_xds_push_timeDistributionTotal time in seconds Pilot takes to push lds, rds, cds and eds.
pilot_xds_pushesSumPilot build and send errors for lds, rds, cds and eds.
pilot_xds_rds_rejectLastValuePilot rejected RDS.
pilot_xds_write_timeoutSumPilot XDS response write timeouts.
sidecar_injection_failure_totalSumTotal number of failed Side car injection requests.
sidecar_injection_requests_totalSumTotal number of Side car injection requests.
sidecar_injection_skip_totalSumTotal number of skipped injection requests.
sidecar_injection_success_totalSumTotal number of successful Side car injection requests.
total_active_connectionsSumThe total number of active SDS connections.
total_push_errorsSumThe total number of failed SDS pushes.
total_pushesSumThe total number of SDS pushes.
total_secret_update_failuresSumThe total number of dynamic secret update failures reported by proxy.
total_stale_connectionsSumThe total number of stale SDS connections.
Was this information useful?
Do you have any suggestions for improvement?

Thanks for your feedback!