pilot-discovery

Istio Pilot provides fleet-wide traffic management capabilities in the Istio Service Mesh.

FlagsDescription
--ctrlz_address <string>The IP Address to listen on for the ControlZ introspection facility. Use '*' to indicate all addresses. (default `localhost`)
--ctrlz_port <uint16>The IP port to use for the ControlZ introspection facility (default `9876`)
--keepaliveInterval <duration>The time interval if no activity on the connection it pings the peer to see if the transport is alive (default `30s`)
--keepaliveMaxServerConnectionAge <duration>Maximum duration a connection will be kept open on the server before a graceful close. (default `2562047h47m16.854775807s`)
--keepaliveTimeout <duration>After having pinged for keepalive check, the client/server waits for a duration of keepaliveTimeout and if no activity is seen even after that the connection is closed. (default `10s`)
--log_as_jsonWhether to format output as JSON or in plain console-friendly format
--log_caller <string>Comma-separated list of scopes for which to include caller information, scopes can be any of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info`)
--log_rotate <string>The path for the optional rotating log file (default ``)
--log_rotate_max_age <int>The maximum age in days of a log file beyond which the file is rotated (0 indicates no limit) (default `30`)
--log_rotate_max_backups <int>The maximum number of log file backups to keep before older files are deleted (0 indicates no limit) (default `1000`)
--log_rotate_max_size <int>The maximum size in megabytes of a log file beyond which the file is rotated (default `104857600`)
--log_stacktrace_level <string>Comma-separated minimum per-scope logging level at which stack traces are captured, in the form of <scope>:<level>,<scope:level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:none`)
--log_target <stringArray>The set of paths where to output the log. This can be any path as well as the special values stdout and stderr (default `[stdout]`)

pilot-discovery discovery

Start Istio proxy discovery service.

pilot-discovery discovery [flags]
FlagsShorthandDescription
--appNamespace <string>-aRestrict the applications namespace the controller manages; if not set, controller watches all namespaces (default ``)
--clusterRegistriesNamespace <string>Namespace for ConfigMap which stores clusters configs (default ``)
--configDir <string>Directory to watch for updates to config yaml files. If specified, the files will be used as the source of config, rather than a CRD client. (default ``)
--consulserverURL <string>URL for the Consul server (default ``)
--ctrlz_address <string>The IP Address to listen on for the ControlZ introspection facility. Use '*' to indicate all addresses. (default `localhost`)
--ctrlz_port <uint16>The IP port to use for the ControlZ introspection facility (default `9876`)
--disable-install-crdsDisable discovery service from verifying the existence of CRDs at startup and then installing if not detected. It is recommended to be disable for highly available setups.
--domain <string>DNS domain suffix (default `cluster.local`)
--grpcAddr <string>Discovery service grpc address (default `:15010`)
--httpAddr <string>Discovery service HTTP address (default `:8080`)
--keepaliveInterval <duration>The time interval if no activity on the connection it pings the peer to see if the transport is alive (default `30s`)
--keepaliveMaxServerConnectionAge <duration>Maximum duration a connection will be kept open on the server before a graceful close. (default `2562047h47m16.854775807s`)
--keepaliveTimeout <duration>After having pinged for keepalive check, the client/server waits for a duration of keepaliveTimeout and if no activity is seen even after that the connection is closed. (default `10s`)
--kubeconfig <string>Use a Kubernetes configuration file instead of in-cluster configuration (default ``)
--log_as_jsonWhether to format output as JSON or in plain console-friendly format
--log_caller <string>Comma-separated list of scopes for which to include caller information, scopes can be any of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info`)
--log_rotate <string>The path for the optional rotating log file (default ``)
--log_rotate_max_age <int>The maximum age in days of a log file beyond which the file is rotated (0 indicates no limit) (default `30`)
--log_rotate_max_backups <int>The maximum number of log file backups to keep before older files are deleted (0 indicates no limit) (default `1000`)
--log_rotate_max_size <int>The maximum size in megabytes of a log file beyond which the file is rotated (default `104857600`)
--log_stacktrace_level <string>Comma-separated minimum per-scope logging level at which stack traces are captured, in the form of <scope>:<level>,<scope:level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:none`)
--log_target <stringArray>The set of paths where to output the log. This can be any path as well as the special values stdout and stderr (default `[stdout]`)
--mcpInitialConnWindowSize <int>Initial connection window size for MCP's gRPC connection (default `1048576`)
--mcpInitialWindowSize <int>Initial window size for MCP's gRPC connection (default `1048576`)
--mcpMaxMsgSize <int>Max message size received by MCP's grpc client (default `4194304`)
--meshConfig <string>File name for Istio mesh configuration. If not specified, a default mesh will be used. (default `/etc/istio/config/mesh`)
--monitoringAddr <string>HTTP address to use for pilot's self-monitoring information (default `:15014`)
--namespace <string>-nSelect a namespace where the controller resides. If not set, uses ${POD_NAMESPACE} environment variable (default ``)
--networksConfig <string>File name for Istio mesh networks configuration. If not specified, a default mesh networks will be used. (default `/etc/istio/config/meshNetworks`)
--plugins <stringSlice>comma separated list of networking plugins to enable (default `[authn,authz,health,mixer]`)
--profileEnable profiling via web interface host:port/debug/pprof
--registries <stringSlice>Comma separated list of platform service registries to read from (choose one or more from {Kubernetes, Consul, MCP, Mock}) (default `[Kubernetes]`)
--resync <duration>Controller resync interval (default `1m0s`)
--secureGrpcAddr <string>Discovery service grpc address, with https (default `:15012`)
--trust-domain <string>The domain serves to identify the system with spiffe (default ``)

pilot-discovery request

Makes an HTTP request to Pilot metrics/debug endpoint

pilot-discovery request <method> <path> [<body>] [flags]
FlagsDescription
--ctrlz_address <string>The IP Address to listen on for the ControlZ introspection facility. Use '*' to indicate all addresses. (default `localhost`)
--ctrlz_port <uint16>The IP port to use for the ControlZ introspection facility (default `9876`)
--keepaliveInterval <duration>The time interval if no activity on the connection it pings the peer to see if the transport is alive (default `30s`)
--keepaliveMaxServerConnectionAge <duration>Maximum duration a connection will be kept open on the server before a graceful close. (default `2562047h47m16.854775807s`)
--keepaliveTimeout <duration>After having pinged for keepalive check, the client/server waits for a duration of keepaliveTimeout and if no activity is seen even after that the connection is closed. (default `10s`)
--log_as_jsonWhether to format output as JSON or in plain console-friendly format
--log_caller <string>Comma-separated list of scopes for which to include caller information, scopes can be any of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info`)
--log_rotate <string>The path for the optional rotating log file (default ``)
--log_rotate_max_age <int>The maximum age in days of a log file beyond which the file is rotated (0 indicates no limit) (default `30`)
--log_rotate_max_backups <int>The maximum number of log file backups to keep before older files are deleted (0 indicates no limit) (default `1000`)
--log_rotate_max_size <int>The maximum size in megabytes of a log file beyond which the file is rotated (default `104857600`)
--log_stacktrace_level <string>Comma-separated minimum per-scope logging level at which stack traces are captured, in the form of <scope>:<level>,<scope:level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:none`)
--log_target <stringArray>The set of paths where to output the log. This can be any path as well as the special values stdout and stderr (default `[stdout]`)

pilot-discovery version

Prints out build version information

pilot-discovery version [flags]
FlagsShorthandDescription
--ctrlz_address <string>The IP Address to listen on for the ControlZ introspection facility. Use '*' to indicate all addresses. (default `localhost`)
--ctrlz_port <uint16>The IP port to use for the ControlZ introspection facility (default `9876`)
--keepaliveInterval <duration>The time interval if no activity on the connection it pings the peer to see if the transport is alive (default `30s`)
--keepaliveMaxServerConnectionAge <duration>Maximum duration a connection will be kept open on the server before a graceful close. (default `2562047h47m16.854775807s`)
--keepaliveTimeout <duration>After having pinged for keepalive check, the client/server waits for a duration of keepaliveTimeout and if no activity is seen even after that the connection is closed. (default `10s`)
--log_as_jsonWhether to format output as JSON or in plain console-friendly format
--log_caller <string>Comma-separated list of scopes for which to include caller information, scopes can be any of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] (default ``)
--log_output_level <string>Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info`)
--log_rotate <string>The path for the optional rotating log file (default ``)
--log_rotate_max_age <int>The maximum age in days of a log file beyond which the file is rotated (0 indicates no limit) (default `30`)
--log_rotate_max_backups <int>The maximum number of log file backups to keep before older files are deleted (0 indicates no limit) (default `1000`)
--log_rotate_max_size <int>The maximum size in megabytes of a log file beyond which the file is rotated (default `104857600`)
--log_stacktrace_level <string>Comma-separated minimum per-scope logging level at which stack traces are captured, in the form of <scope>:<level>,<scope:level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:none`)
--log_target <stringArray>The set of paths where to output the log. This can be any path as well as the special values stdout and stderr (default `[stdout]`)
--output <string>-oOne of 'yaml' or 'json'. (default ``)
--short-sUse --short=false to generate full version information

Environment variables

These environment variables affect the behavior of the pilot-discovery command.
Variable NameTypeDefault ValueDescription
AUDIENCEStringExpected audience in the tokens.
AUTHZ_FAILURE_LOG_BURST_SIZEInteger1
AUTHZ_FAILURE_LOG_FREQTime Duration1m0s
BYPASS_OOP_MTLS_SAN_VERIFICATIONBooleanfalseWhether or not to validate SANs for out-of-process adapters auth.
CITADEL_ENABLE_JITTER_FOR_ROOT_CERT_ROTATORBooleantrueIf true, set up a jitter to start root cert rotator. Jitter selects a backoff time in seconds to start root cert rotator, and the back off time is below root cert check interval.
CITADEL_SELF_SIGNED_CA_CERT_TTLTime Duration87600h0m0sThe TTL of self-signed CA root certificate.
CITADEL_SELF_SIGNED_ROOT_CERT_CHECK_INTERVALTime Duration1h0m0sThe interval that self-signed CA checks its root certificate expiration time and rotates root certificate. Setting this interval to zero or a negative value disables automated root cert check and rotation. This interval is suggested to be larger than 10 minutes.
CITADEL_SELF_SIGNED_ROOT_CERT_GRACE_PERIOD_PERCENTILEInteger20Grace period percentile for self-signed root cert.
ISTIOD_ADDRStringService name of istiod. If empty the istiod listener, certs will be disabled.
ISTIO_GPRC_MAXSTREAMSInteger100000Sets the maximum number of concurrent grpc streams.
ISTIO_LANGStringSelects the attribute expression language runtime for Mixer.
K8S_INGRESS_NSString
KUBERNETES_SERVICE_HOSTStringKuberenetes service host, set automatically when running in-cluster
MAX_WORKLOAD_CERT_TTLTime Duration2160h0m0sThe max TTL of issued workload certificates.
PILOT_BLOCK_HTTP_ON_443BooleantrueIf enabled, any HTTP services will be blocked on HTTPS port (443). If this is disabled, any HTTP service on port 443 could block all external traffic
PILOT_CERT_DIRString
PILOT_DEBOUNCE_AFTERTime Duration100msThe delay added to config/registry events for debouncing. This will delay the push by at least this internal. If no change is detected within this period, the push will happen, otherwise we'll keep delaying until things settle, up to a max of PILOT_DEBOUNCE_MAX.
PILOT_DEBOUNCE_MAXTime Duration10sThe maximum amount of time to wait for events while debouncing. If events keep showing up with no breaks for this time, we'll trigger a push.
PILOT_DEBUG_ADSZ_CONFIGBooleanfalse
PILOT_DISABLE_XDS_MARSHALING_TO_ANYBooleanfalse
PILOT_DISTRIBUTION_HISTORY_RETENTIONTime Duration1m0sIf enabled, Pilot will keep track of old versions of distributed config for this duration.
PILOT_ENABLE_CONFIG_DISTRIBUTION_TRACKINGBooleantrueIf enabled, Pilot will assign meaningful nonces to each Envoy configuration message, and allow users to interrogate which envoy has which config from the debug interface.
PILOT_ENABLE_CRD_VALIDATIONBooleanfalseIf enabled, pilot will validate CRDs while retrieving CRDs from kubernetes cache.Use this flag to enable validation of CRDs in Pilot, especially in deployments that do not have galley installed.
PILOT_ENABLE_EDS_DEBOUNCEBooleantrueIf enabled, Pilot will include EDS pushes in the push debouncing, configured by PILOT_DEBOUNCE_AFTER and PILOT_DEBOUNCE_MAX. EDS pushes may be delayed, but there will be fewer pushes. By default this is enabled
PILOT_ENABLE_FALLTHROUGH_ROUTEBooleantrueEnableFallthroughRoute provides an option to add a final wildcard match for routes. When ALLOW_ANY traffic policy is used, a Passthrough cluster is used. When REGISTRY_ONLY traffic policy is used, a 502 error is returned.
PILOT_ENABLE_HEADLESS_SERVICE_POD_LISTENERSBooleantrueIf enabled, for a headless service/stateful set in Kubernetes, pilot will generate an outbound listener for each pod in a headless service. This feature should be disabled if headless services have a large number of pods.
PILOT_ENABLE_MYSQL_FILTERBooleanfalseEnableMysqlFilter enables injection of `envoy.filters.network.mysql_proxy` in the filter chain.
PILOT_ENABLE_PROTOCOL_SNIFFING_FOR_INBOUNDBooleantrueIf enabled, protocol sniffing will be used for inbound listeners whose port protocol is not specified or unsupported
PILOT_ENABLE_PROTOCOL_SNIFFING_FOR_OUTBOUNDBooleantrueIf enabled, protocol sniffing will be used for outbound listeners whose port protocol is not specified or unsupported
PILOT_ENABLE_REDIS_FILTERBooleanfalseEnableRedisFilter enables injection of `envoy.filters.network.redis_proxy` in the filter chain.
PILOT_ENABLE_UNSAFE_REGEXBooleanfalseIf enabled, pilot will generate Envoy configuration that does not use safe_regex but the older, deprecated regex field. This should only be enabled to support legacy deployments that have not yet been migrated to the new safe regular expressions.
PILOT_HTTP10BooleanfalseEnables the use of HTTP 1.0 in the outbound HTTP listeners, to support legacy applications.
PILOT_INBOUND_PROTOCOL_DETECTION_TIMEOUTTime Duration1sProtocol detection timeout for inbound listener
PILOT_INITIAL_FETCH_TIMEOUTTime Duration0sSpecifies the initial_fetch_timeout for config. If this time is reached without a response to the config requested by Envoy, the Envoy will move on with the init phase. This prevents envoy from getting stuck waiting on config during startup.
PILOT_PUSH_THROTTLEInteger100Limits the number of concurrent pushes allowed. On larger machines this can be increased for faster pushes
PILOT_RESPECT_DNS_TTLBooleantrueIf enabled, DNS based clusters will respect the TTL of the DNS, rather than polling at a fixed rate. This option is only provided for backward compatibility purposes and will be removed in the near future.
PILOT_RESTRICT_POD_UP_TRAFFIC_LOOPBooleantrueIf enabled, this will block inbound traffic from matching outbound listeners, which could result in an infinite loop of traffic. This option is only provided for backward compatibility purposes and will be removed in the near future.
PILOT_SCOPE_GATEWAY_TO_NAMESPACEBooleanfalseIf enabled, a gateway workload can only select gateway resources in the same namespace. Gateways with same selectors in different namespaces will not be applicable.
PILOT_SCOPE_PUSHESBooleantrueIf enabled, pilot will attempt to limit unnecessary pushes by determining what proxies a config or endpoint update will impact.
PILOT_SIDECAR_USE_REMOTE_ADDRESSBooleanfalseUseRemoteAddress sets useRemoteAddress to true for side car outbound listeners.
PILOT_SKIP_VALIDATE_TRUST_DOMAINBooleanfalseSkip validating the peer is from the same trust domain when mTLS is enabled in authentication policy
PILOT_TRACE_SAMPLINGFloating-Point100Sets the mesh-wide trace sampling percentage. Should be 0.0 - 100.0. Precision to 0.01. Default is 100, not recommended for production use.
POD_NAMEString
POD_NAMESPACEString
ROOT_CA_DIRString./etc/cacertsLocation of a local or mounted CA root
TERMINATION_DRAIN_DURATION_SECONDSInteger5The amount of time allowed for connections to complete on pilot-agent shutdown. On receiving SIGTERM or SIGINT, pilot-agent tells the active Envoy to start draining, preventing any new connections and allowing existing connections to complete. It then sleeps for the TerminationDrainDuration and then kills any remaining active Envoy processes.
TOKEN_ISSUERStringOIDC token issuer. If set, will be used to check the tokens.
USE_ISTIO_JWT_FILTERBooleanfalseUse the Istio JWT filter for JWT token verification.
WEBHOOKStringName of webhook config to patch, if istioctl is not used.
WORKLOAD_CERT_TTLTime Duration2160h0m0sThe TTL of issued workload certificates.

Exported metrics

Metric NameTypeDescription
citadel_secret_controller_csr_err_countSumThe number of errors occurred when creating the CSR.
citadel_secret_controller_csr_sign_err_countSumThe number of errors occurred when signing the CSR.
citadel_secret_controller_secret_deleted_cert_countSumThe number of certificates recreated due to secret deletion (service account still exists).
citadel_secret_controller_svc_acc_created_cert_countSumThe number of certificates created due to service account creation.
citadel_secret_controller_svc_acc_deleted_cert_countSumThe number of certificates deleted due to service account deletion.
citadel_server_authentication_failure_countSumThe number of authentication failures.
citadel_server_csr_countSumThe number of CSRs received by Citadel server.
citadel_server_csr_parsing_err_countSumThe number of errors occurred when parsing the CSR.
citadel_server_csr_sign_err_countSumThe number of errors occurred when signing the CSR.
citadel_server_id_extraction_err_countSumThe number of errors occurred when extracting the ID from CSR.
citadel_server_root_cert_expiry_timestampLastValueThe unix timestamp, in seconds, when Citadel root cert will expire. We set it to negative in case of internal error.
citadel_server_success_cert_issuance_countSumThe number of certificates issuances that have succeeded.
endpoint_no_podLastValueEndpoints without an associated pod.
galley_runtime_processor_event_span_duration_millisecondsDistributionThe duration between each incoming event
galley_runtime_processor_events_processed_totalCountThe number of events that have been processed
galley_runtime_processor_snapshot_events_totalDistributionThe number of events per snapshot
galley_runtime_processor_snapshot_lifetime_duration_millisecondsDistributionThe duration of each snapshot
galley_runtime_processor_snapshots_published_totalCountThe number of snapshots that have been published
galley_runtime_state_type_instances_totalLastValueThe number of type instances per type URL
galley_runtime_strategy_on_change_totalCountThe number of times the strategy's onChange has been called
galley_runtime_strategy_timer_max_time_reached_totalCountThe number of times the max time has been reached
galley_runtime_strategy_timer_quiesce_reached_totalCountThe number of times a quiesce has been reached
galley_runtime_strategy_timer_resets_totalCountThe number of times the timer has been reset
galley_source_kube_dynamic_converter_failure_totalCountThe number of times a dynamnic kubernetes source failed converting a resources
galley_source_kube_dynamic_converter_success_totalCountThe number of times a dynamic kubernetes source successfully converted a resource
galley_source_kube_event_error_totalCountThe number of times a kubernetes source encountered errored while handling an event
galley_source_kube_event_success_totalCountThe number of times a kubernetes source successfully handled an event
galley_validation_cert_key_update_errorsCountGalley validation webhook certificate updates errors
galley_validation_cert_key_updatesCountGalley validation webhook certificate updates
galley_validation_config_loadCountk8s webhook configuration (re)loads
galley_validation_config_load_errorCountk8s webhook configuration (re)load error
galley_validation_config_update_errorCountk8s webhook configuration update error
galley_validation_config_updatesCountk8s webhook configuration updates
galley_validation_failedCountResource validation failed
galley_validation_http_errorCountResource validation http serve errors
galley_validation_passedCountResource is valid
istio_buildLastValueIstio component build info
istio_mcp_clients_totalLastValueThe number of streams currently connected.
istio_mcp_message_sizes_bytesDistributionSize of messages received from clients.
istio_mcp_reconnectionsSumThe number of times the sink has reconnected.
istio_mcp_recv_failures_totalSumThe number of recv failures in the source.
istio_mcp_request_acks_totalSumThe number of request acks received by the source.
istio_mcp_request_nacks_totalSumThe number of request nacks received by the source.
istio_mcp_send_failures_totalSumThe number of send failures in the source.
mixer_config_adapter_info_config_errors_totalLastValueThe number of errors encountered during processing of the adapter info configuration.
mixer_config_adapter_info_configs_totalLastValueThe number of known adapters in the current config.
mixer_config_attributes_totalLastValueThe number of known attributes in the current config.
mixer_config_handler_configs_totalLastValueThe number of known handlers in the current config.
mixer_config_handler_validation_error_totalLastValueThe number of errors encountered because handler validation returned error.
mixer_config_instance_config_errors_totalLastValueThe number of errors encountered during processing of the instance configuration.
mixer_config_instance_configs_totalLastValueThe number of known instances in the current config.
mixer_config_rule_config_errors_totalLastValueThe number of errors encountered during processing of the rule configuration.
mixer_config_rule_config_match_error_totalLastValueThe number of rule conditions that was not parseable.
mixer_config_rule_configs_totalLastValueThe number of known rules in the current config.
mixer_config_template_config_errors_totalLastValueThe number of errors encountered during processing of the template configuration.
mixer_config_template_configs_totalLastValueThe number of known templates in the current config.
mixer_config_unsatisfied_action_handler_totalLastValueThe number of actions that failed due to handlers being unavailable.
mixer_dispatcher_destinations_per_requestDistributionNumber of handlers dispatched per request by Mixer
mixer_dispatcher_destinations_per_variety_totalLastValueNumber of Mixer adapter destinations by template variety type
mixer_dispatcher_instances_per_requestDistributionNumber of instances created per request by Mixer
mixer_handler_closed_handlers_totalLastValueThe number of handlers that were closed during config transition.
mixer_handler_daemons_totalLastValueThe current number of active daemon routines in a given adapter environment.
mixer_handler_handler_build_failures_totalLastValueThe number of handlers that failed creation during config transition.
mixer_handler_handler_close_failures_totalLastValueThe number of errors encountered while closing handlers during config transition.
mixer_handler_new_handlers_totalLastValueThe number of handlers that were newly created during config transition.
mixer_handler_reused_handlers_totalLastValueThe number of handlers that were re-used during config transition.
mixer_handler_workers_totalLastValueThe current number of active worker routines in a given adapter environment.
mixer_runtime_dispatch_duration_secondsDistributionDuration in seconds for adapter dispatches handled by Mixer.
mixer_runtime_dispatches_totalCountTotal number of adapter dispatches handled by Mixer.
pilot_conflict_inbound_listenerLastValueNumber of conflicting inbound listeners.
pilot_conflict_outbound_listener_http_over_current_tcpLastValueNumber of conflicting wildcard http listeners with current wildcard tcp listener.
pilot_conflict_outbound_listener_http_over_httpsLastValueNumber of conflicting HTTP listeners with well known HTTPS ports
pilot_conflict_outbound_listener_tcp_over_current_httpLastValueNumber of conflicting wildcard tcp listeners with current wildcard http listener.
pilot_conflict_outbound_listener_tcp_over_current_tcpLastValueNumber of conflicting tcp listeners with current tcp listener.
pilot_destrule_subsetsLastValueDuplicate subsets across destination rules for same host
pilot_duplicate_envoy_clustersLastValueDuplicate envoy clusters caused by service entries with same hostname
pilot_eds_no_instancesLastValueNumber of clusters without instances.
pilot_endpoint_not_readyLastValueEndpoint found in unready state.
pilot_inbound_updatesSumTotal number of updates received by pilot.
pilot_invalid_out_listenersLastValueNumber of invalid outbound listeners.
pilot_jwks_resolver_network_fetch_fail_totalSumTotal number of failed network fetch by pilot jwks resolver
pilot_jwks_resolver_network_fetch_success_totalSumTotal number of successfully network fetch by pilot jwks resolver
pilot_k8s_cfg_eventsSumEvents from k8s config.
pilot_k8s_endpoints_with_no_podsSumEndpoints that does not have any corresponding pods.
pilot_k8s_object_errorsLastValueErrors converting k8s CRDs
pilot_k8s_reg_eventsSumEvents from k8s registry.
pilot_no_ipLastValuePods not found in the endpoint table, possibly invalid.
pilot_proxy_convergence_timeDistributionDelay in seconds between config change and a proxy receiving all required configuration.
pilot_proxy_queue_timeDistributionTime in seconds, a proxy is in the push queue before being dequeued.
pilot_rds_expired_nonceSumTotal number of RDS messages with an expired nonce.
pilot_servicesLastValueTotal services known to pilot.
pilot_total_rejected_configsSumTotal number of configs that Pilot had to reject or ignore.
pilot_total_xds_internal_errorsSumTotal number of internal XDS errors in pilot.
pilot_total_xds_rejectsSumTotal number of XDS responses from pilot rejected by proxy.
pilot_virt_servicesLastValueTotal virtual services known to pilot.
pilot_vservice_dup_domainLastValueVirtual services with dup domains.
pilot_xdsLastValueNumber of endpoints connected to this pilot using XDS.
pilot_xds_cds_rejectLastValuePilot rejected CDS configs.
pilot_xds_eds_all_locality_endpointsLastValueNetwork endpoints for each cluster(across all localities), as of last push. Zero endpoints is an error.
pilot_xds_eds_instancesLastValueInstances for each cluster(grouped by locality), as of last push. Zero instances is an error.
pilot_xds_eds_rejectLastValuePilot rejected EDS.
pilot_xds_lds_rejectLastValuePilot rejected LDS.
pilot_xds_push_context_errorsSumNumber of errors (timeouts) initiating push context.
pilot_xds_push_timeDistributionTotal time in seconds Pilot takes to push lds, rds, cds and eds.
pilot_xds_pushesSumPilot build and send errors for lds, rds, cds and eds.
pilot_xds_rds_rejectLastValuePilot rejected RDS.
pilot_xds_write_timeoutSumPilot XDS response write timeouts.
sidecar_injection_failure_totalSumTotal number of failed Side car injection requests.
sidecar_injection_requests_totalSumTotal number of Side car injection requests.
sidecar_injection_skip_totalSumTotal number of skipped injection requests.
sidecar_injection_success_totalSumTotal number of successful Side car injection requests.
Esta informação foi útil?
Você tem alguma sugestão de melhoria?

Obrigado pelo seu feedback!